record_id: 2fef8b3e-f83d-8133-a1b0-d9049cae7f7f
created_time: 2026-02-05T13:36:00.000Z
title: 02-04 Coordination Meeting: Pool/Spa Construction, Tile/Waterproofing Details, and Water–Fire Feature Integration
source_url: /

[TRANSCRIPTION]
Speaker 1 00:00:05
See how far the cover is above, like above the tile here when it crosses over. Cause I know they give us, He tells me three and I just follow it because I don't want him to say. Oh, it doesn't work because of you guys. But if we were to actually close Tennyson, stop it at this corner and measure. Yeah. That'll tell you really what you have to be. All right. I can do that. Well, I don't want to cheat him, but then we know like all right. No, but we can know if we make a mistake. We don't have the demo tile. We know that's going to stack a little bit. But it's good to know, right? The elbow's wider, So it's going to I think deflect more than I. Don't know if these are a different size of bar. Right there.
Speaker 2 00:00:52
Yeah. Because, our drawing had it the spot them all at sixteenth below water and three inches down from the sixteenth below that. What do you mean? Oh yeah. 
Speaker 1 00:01:04
Sixteenth Of water on the top of the tile. Oh. Yeah, I mean, I but I would do this tile. Yeah, This water, when it turns on will be, but the water level doesn't matter because if the leading edge bar hits the water, it's not going to, you know, it's not going to stop it. But this that the water can be so we were showing a sixteenth up?
Speaker 2 00:01:25
Down. Oh The water there's a sixteenth inch of water above that tile, Yeah, and and there's three inches of water. No, I would do this at three. Tile.
Speaker 1 00:01:40
Yeah, Yeah, yeah, yeah, because our we want I mean, we want our water there, which we're not going to get. All, right. So it's going to be a little bit low in here, but we want it more or less at the very middle, which is probably a little higher than what we actually.
Speaker 1 00:01:58
We'll end up actually getting. You can say" mussemanos." No, I don't want mussemanos. Mussemanos is good in my head. Have you seen anybody cutting steel over there?
Speaker 2 00:02:15
There's a bunch of. I saw a bunch of cut steel like half- inch stuff. It was piled up over there in the corner.
Speaker 1 00:02:58
And then it's going to be, you know, they complain about the price of the lights. They're obviously going to complain about the price of the heaters. It's like, okay. Like, you can't fit the heaters in there without building something to slide them across, you know? Like they're three hundred and fifty pounds. Like how do you get those heaters?
Speaker 1 00:03:30
Yeah, this is the only thing I saw from my. The drop of pictures that was concerning. Was the elevation? Good. 
Speaker 3 00:03:42
Morning, good morning, good morning. Is. 
Speaker 2 00:03:47
This gonna go today? Yeah, He got here and he's like my knee hurts too much. And I'm like how'd you hurt your knees, like not where it's supposed to hurt and I thought I could get through today. You don't need me. He's like, I will, but if you don't need me, I'm like, nope. You don't need to draft. No. Yeah, write it up. So.
Speaker 1 00:04:14
Oh! I need a. I was looking at your drawing. Versusum.
Speaker 2 00:04:27
I changed my whole drawing last night.
Speaker 1 00:04:29
Yeah, no, I'm more thinking about this.
Speaker 2 00:04:35
So, Afghanistan was like seven and five eight here. Seven? He's in seven, yeah.
Speaker 1 00:04:60
For a headed leading edge bar, comma how much space do I need in the beam question mark. 
Speaker 1 00:05:49
It's Just based on the size of the tile, really. Right? Uh, you got one right there. Yeah, you're fine.
Speaker 3 00:06:15
So, like our tiles.
Speaker 1 00:06:20
Like this float is sort of arbitrary, except for we have three- inch tiles, right? So I wouldn't. Well, yeah. So is it called two? Was it two and seven? I thought you said it was two and seven eighths. So two tiles. No,
Speaker 2 00:06:35
I said with the two inches, I gave it an inch and seven eighths. But I didn't want to float anythingum width wise until we knew that.
Speaker 1 00:06:45
So the actual tile is two and three quarters with an eighth inch joint. So it's two and three. 
Speaker 2 00:06:50
Quarters going this way, and then and then if you turn it the other way, it's another sixteenth. Okay. So we had two and three quarters,
Speaker 1 00:06:58
Two and three quarters. That's five and a half plus an eighth inch joint. What I'm trying to see is hey, how small can I make this? Okay. Right? Because I'd rather just have two full tiles right? And then, Set this wherever it goes. float this up, but set this wherever we need it, float this to the back side of that. right? probably give me enough for two holes. well, and we really only have to have, but yeah you could do two. but you don't really have to. we can just cut route that back angle right? because this really is um just needs to be rounded right? never gets seen right?
Speaker 1 00:07:42
Once the bar is in here, you have the bar here, the fabric, and it's never ever getting seen again. But it has to be smooth, right? Or it has to be you know rounded. It can't be sharp. So that's like once we float, We get a float and round our float and then we grout and round our grout. You're fine on the back side here. Like I told us we didn't even tile this way. Right, we didn't tile that last section. We typically will just fill it in with grout or something and just grout, right? Well, I was just thinking, like, what if we just put a bullnose here? You're saying we didn't grout. We didn't tile this at all? I thought we tiled this. Oh really? Oh really? Yeah. The whole top. Yeah. Um. But I would like this to be a bullnose cut. But the top of this has to be and that's the other thing, I got to find out. I think it's inch and a half bottom of track Right. 
Speaker 2 00:08:40
Is this too wet? I was looking at that when you walked up and so. I tested them, yesterday, day before, yeah. Wetness. And uh. Oh, you're gonna put water on the carpet to make sure it's not.
Speaker 1 00:09:01
As long as it's not all over it's not that big of a deal. Um, but anyway, from bottom of track to top of tile or top, oh, that might have been what it was. We didn't have enough room for on bottom of the track. You got to have an inch and a half there, right? So the track's going to be here. You're going to have an inch and a half down, right? And that's the highest you could be there. You need that inch and a half for it to. And he's also probably going to. Right. I think it's like three quarter. 
Speaker 2 00:09:26
Inch or something like that is what they cut at Kennison, but don't don't quote me on that. Okay. I can.
Speaker 1 00:09:33
Are we done?
Speaker 2 00:09:34
We'll be done with this today.
Speaker 1 00:09:36
This to here? So there. Um, I mean, you may as well extend that. Yeah, cut it. Right. The only issue is if they cut it down that much. What does that do to the water level? I mean, that's above the water level.
Speaker 2 00:09:50
That's not going to be a problem. Yeah, all right. So yeah, So we're just going to fill that We're going to move that wood today. And then we're done with the track today for this period.
Speaker 1 00:10:46
But Drew wants to see pictures of the model, going back to that. So I was hoping we could get that. So I'm hoping we could be done at least with the model today because we can't get you renderings for until I tell you what's done. You want to? I think I have my laptop right there if you want to pull it up.
Speaker 2 00:11:07
Yeah, we can do that. So far as this, you want, do you want to look at what I got there or do you. Well, you got to. You need to find out. You know, you need an inch and a half. This here needs to be an inch and a half.
Speaker 1 00:11:22
This here, I mean, you can float that elevation; it doesn't matter, right? Your height— the lower one. What height do you want? Well, This— this needs to be what we talked about when we looked at it yesterday— needs to be under the water, right? So that yeah. Yeah, I mean— you should have some water over it. So whether that's a half or three eighths or a quarter or something. Right, the water essentially goes to here, And then that's your overflow when they start when it surges when they're swimming overflows to here. And then it goes wherever to the drain we put the drain. And then this is membrane C and BC Pro but smooth BC Pro black. You don't want not rough, not white. Those are great on that side.
Speaker 1 00:12:15
So the drain we got a detail, right? Pipe detail. Did we? Alright, cool. Yeah. This one we don't like electrical. What do you think about that? I think we should detail.
Speaker 2 00:12:26
Yeah, we probably should at least detail around it and seal it. I told him we should start like also on those Right? Yep. Yep So you're gonna. I was wondering why we came through the floor on that one. 
Speaker 2 00:12:43
I was thinking, it's like, you know, after we did the all threads and stuff like that I kind of want to change all this instead of tight details and just penetration, you know, penetration detail. No it is it is penetration. So I was uh think about something to figure out what's going on today. Nah nah,
Speaker 1 00:13:09
Wait oh down below well, I saw now he signed another picture with a tick. But then even when they have tape, then they.
Speaker 2 00:13:16
No, and that's. It's like man, We we made an adjustment, and you know, this one, they got fresh tape on. Right. And I was like.
Speaker 1 00:13:25
And then it was with the bunnies when they when you have the tape. So, because you put the tape there now you're not even trying to just hit the line you're trying to cover the whole thing?
Speaker 1 00:13:42
A bunch of material you don't really and I'm not like nitpicking on the material,
Speaker 2 00:13:46
But go to the tape, not to the bottom of the tape, but to the top line. And yeah, There's one of them where like they did by hand, because like they couldn't get the tape to stick to that. Like okay, yeah, you know. But. 
Speaker 1 00:13:60
On those you can use a better tape too right? You can use a thirty day like release stuff with tape, something a lot stronger that at least thirty days. You know, it'll stick better than like blue tape or.
Speaker 2 00:14:43
Yeah, and I've seen the red one now.
Speaker 1 00:14:47
And did we go through? I mean, I had the guys. So we've gone through here. We still have to do that one.
Speaker 2 00:14:53
There's still a wire there. Yeah, we've gone but we've gone throughum everything from the top. We got we got most of them but there's still. 
Speaker 1 00:15:13
Like this. As long as that's not separating, okay, we need to keep an eye on that. Like we let's see here, that probably goes all the way through. It's not more than a sixteenth, so it shouldn't separate right? It's rated for sixteenths right? So if you see this crack extend before you do this, it might not be a bad idea to chase that in M1 right? But that is the myth you know, that is a small crack. It's not separating. It's just shrinking so it should be no problem, 'Cause this should be able to flex underneath. Maybe that's interesting. What happened here? It's our wire. Shotcrete wire. Oh, it's just moving a little bit. They were probably, yeah, well and then they're they're scraping it, you know and it probably was. That's not a big deal I mean. No no I can go through like in 20 minutes. No no So I think it goes right to that wire there right? Those two wires on that side?
Speaker 1 00:16:13
So it's just when they're finishing it. I don't know why. I don't know on this side and not that side. But you can do you think this is gonna be a decent waterproofing?
Speaker 2 00:16:24
Get it. Run the bush hammer over it, but. Oh, uh, Ash came back one day withum. Like I see these little purple things on her desk. She came back from World Concrete and like. What do you think of this? What do you think of this? I'm taking it for one day. Like, you better bring it back. Did I ever give you the ones that I have? No, I have no idea where they are.
Speaker 1 00:16:52
But like, like came, I showed all the guys, like feel it. Yeah, yeah. So did I ever show you the ones that I have? Have you ever seen them? So you knew what they were when you saw those?
Speaker 2 00:17:03
Yeah. Just have no idea where they are now.
Speaker 2 00:17:12
Oh, so they forgot this one. We get it. We gotta cut that one,
Speaker 1 00:17:18
But I have them cut this. Alright, okay. Soum But even this is from below the tile, right? Right. Yeah So that's what's in there. You got this But you can do You can go from here. You know So. Well, you'll go look atum When. You go to Rocky Point next Look at what they did to the tile on the floor. Okay Cause. Your tile is out here. They trowel, it. A corner. Alright, So it's sharp. And then it turns into a ball when you're about to go down. But, they will do a certain amount of sharpening here, and this will work better as long as it can be sharp to a certain point. But I guess. I mean, I would say do this well,
Speaker 2 00:17:60
So you got to do it right. At tennis thing we did this. Yeah. We cut underneath and went like that. Yeah. And that's fine. Um, but after we had that conversation I kind of went. Hadn't looked at all these. Yeah. You know, like I think we could probably do that step as well, that vertical corner.
Speaker 1 00:18:19
Yeah. Yeah, yeah. Yeah,'cause when they demoed. When the guys demoed this, they did the corners too, right? Yeah.'Cause we had to lower that shot at the wrong elevation. We're shot at the elevation he gave us them, which is the wrong elevation. We had to rebar for that step.
Speaker 2 00:18:46
This Is the new guy, yeah. Yeah. I mean, still.
Speaker 1 00:18:53
I think that's why I'm like tempted to have him do more stuff, but it's like. Kim's work so much better. He does require so much babysitting, but. Uh. Stop blowing.
Speaker 1 00:19:16
Sixty, whatever fifty percent. Plus Balboa, he wants room and board. And he's still like, or are we done? No, so it's he's half the.
Speaker 3 00:19:34
No, sorry Jim will.
Speaker 2 00:19:50
We checked on all these five details that we have enough for the gallon, and we ended up pushing back farther. Um,
Speaker 1 00:19:57
You want us to do the cleaning? Not yet. Because we have to extend. We have to extend the plumbing. So by the time that happens, we'll be gone. Yeah, I think we got some stuff. Good deal with that thing.
Speaker 3 00:20:11
You know what?
Speaker 1 00:20:22
You know, you're going to have a piece of tile here too, though, right? Did you draw this already? You're going to have a one- inch tile or something here. Yeah.
Speaker 1 00:21:15
So we're not floating an inch and a half, right? Because we're going to have to float this a lot. Right. But still good to know what that number is, right? For uh. Yeah, so'cause here I put. And I would say on this, I meant to tell you. I mean, you can, if, if tapering, this is an easy way to do the float. I just I just kept the. Yeah yeah. But if it's if tapering it takes. 
Speaker 2 00:21:38
Extra effort, I'm just. I just copied it from Tennyson but my intention was to cut it out.
Speaker 1 00:21:45
Um, But I just I saw it.
Speaker 2 00:21:47
They're virtually kind of get straightened so.
Speaker 2 00:21:51
Yeah, Because then in love with the put a rag underneath. Right, right. Soum, but we've got yeah gap happening there. This is two bull tiles right?
Speaker 1 00:21:60
That tile was smaller than that tile but just Going. 
Speaker 1 00:22:17
But yeah, this is fine. And this can be, I mean, yeah. And then I think that's the level line on it. But also this tile will work. Well, that won't work. This will work because we can pick whatever that is as long as it's over, probably six or seven inches. It's going to tell me okay, um, but they should be from here to the top. What's this here? Bottom of track top of tile there guideline.
Speaker 1 00:22:47
Exactly. Right.
Speaker 2 00:22:53
Well, I could also. I'm just switching back and forth trying to make it the same. So, not worse. Um, and then this is two inch.
Speaker 1 00:23:03
I think we need to find out from Mark what this actually is.
Speaker 1 00:23:24
Two outside corner squares. If one doesn't work, use the other one.
Speaker 1 00:23:44
Is Mark available? Hey, what's up, dudes? Corey. Good, how are you? Yeah, final answer. Sorry dude. I had to like when you when I realized I crossed out something that I shouldn't have. I'm like, my mind was not been all there when I was sending this last time. Let me review everything, of course. Yeah, yeah. It saved me like seven hundred bucks. That's good. Um, right? Well, I will, I will. I got ten percent over. I have ten percent over i and it's just not waste on these for the most part. So um question for you about the two by twos Can, you give me the exact dimensions.
Speaker 1 00:24:21
Of the two by twos, cause these three by threes are like two and three quarters, two and thirteen sixteenths, right? And so the two by twos, I'm trying to set up the thickness of this spa wall that takes the two by twos. So I have to float my my sides to give me the exact dimensions I need on the top. But I need to know what but I need you know, I basically have seven. I'm thinking I got seven tiles right? So from outside edge of.I'm gonna have a row of. One side bullnose, a row of one side bullnose, And then I am going to have five tiles in between that are flat squares. Right, I just need to know what seven tiles out to out with the one eighth grout joint.
Speaker 1 00:25:33
Color stuff. three by three was single edge bullnose. How? How are you? Good. Yeah? Yeah. Um, just grinding on the details? Yeah, we're actually moving on to something else, but we haven't started that yet. Everything good? Yeah, everything's good. Okay. You need anything? No, I think we're good. I mean, We're trying to I'm trying to schedule the track installer come install the track Oh, we'll need that before the. Text: I'm saying it's ready. So schedule me. It'll probably be, I'd be shocked if it came this week, but it'll be next week at the latest. He told me originally about a week. Once you get that in, you guys will be able to move on to coping. Yeah, we should have that material next week. Yeah, and then we'll prioritize that and put like a one-inch mortar bed underneath there? Yeah, Inch and a half, if you want just loose sand dry pack no more, no.
Speaker 1 00:26:31
We're going to be an eight to a quarter. Yeah, is that acceptable? That would be okay. I mean, it's not me; it's the thinset manufacturer. Yeah, they're the ones who say yes. Well, I thought it was a waterproofing thing. No, well. The thinset manufacturers of you use Platinum two fifty four They say like max four. Yeah, We wouldn't be using thinset for that or grout right And, then typically when they use dry pack Dry pack. Spin that. The issue with that is if it's thick, and my tile is partially on that and partially on my stuff, that always cracks. You see a lot of pools with cracks around like we don't want that. Yeah, we don't. So we're going to do eighth or quarter max. Yeah, I'll be two inch max. Okay. All right,
Speaker 3 00:27:18
Gentlemen, carry on.
Speaker 1 00:27:20
Hey, I uh name dropped you the other day? Yeah? Yeah, I saw Baldwin showed up at one of my jobs, and it was a job that he had done years ago. And we redid it. And then the client had us redo a pool that failed also. And I got the skinny that they've had all sorts of issues and ripped it out twice and redid tiles twice. All them, I don't understand what's wrong with that pool. We did it perfect. Ladda Creek came out uh uh So we get into the remodel, you got like four more minutes? Yeah Okay So, we get into the remodel It's bad dude, everything. Copey's delaminated Where is that address? Palos Verdes Estates Uh Rocky Point. 
Speaker 1 00:27:59
Tyler did the main house, Baldwin did the guest house. Have you seen that? Property's amazing. Yeah, I've seen it. Oh okay, developers super cool. Like, we've been maintaining it for years. And then we've been doing all the repair work there because so full disclosure, I've had one tile failure in my entire career. That's small and I paid for it or ripped it out, told the guy will take care of it. He's like all right. Well, let me know how much you found said, no warranty really. He's like, nobody's ever wanted to do one thing. I said, well, I can't explain it. It's gotta be something we did. That's awesome. So, we're gonna pay for it, and we're gonna do it and we fixed it. And it hasn't had a problem since that was when you first started, right?
Speaker 2 00:28:43
Yeah, so three years ago?
Speaker 1 00:28:45
Three years ago? Freaking. Hey knock on concrete. Yeah Well, we did it right. Yeah So anyway. Oh We did that full perfect? I said well, And he was out of town, I said. Well, actually, if you wanna come by I'll show you. There's voids around all the pipes, the shock tree's hollow, the coping's delaminated. And he was like, oh okay well we'll talk later. So he lives right now. Yeah he lives there. He doesn't want to come back. So, he comes by on Friday and walks in the gate, and he knows the owner is not there. You know, because he's never there, and uh was like, so what did you have to do? I told him. And then he's like alright well. He's like. He said something and I said look we love. Oh I didn't think you wanted to build down here.
Speaker 1 00:29:23
That's why I haven't been giving you work. I said, well, the last one you gave me was on the Strand, and I bid it and I never heard back. I said, but we've got several projects. What do you mean you have several projects? I said, yeah, we're doing stuff with Silicon Valley with Ryan and Sprinkles. Really? I said yeah. Like good jobs too. They're great like they're clients. Um like good clients. They're building amazing houses. We love being down here and me and him And, he was standing there. He said no, I live right here in Huntington. He lives in your Orlando. So this is good for us. Oh well, I didn't think you wanted to come down here. So i've been giving my work to uh. Anyway, so he called me yesterday. Hey, uh I'm sending you a job on on the Strand and yeah, he doesn't want. When, he originally did I tell you the story when he originally I told him I had this job for you. Tennyson? He's like oh he won't hire you. When he sees your pricing, he's gonna keep. He's gonna He's gonna call somebody else. He can nobody can afford it plus you shouldn't be working for anybody else. You're my secret weapon and I'm like well, I mean if anybody would yeah whatever anyway so that's my Baldwin story. He is secure in his ideas. II don't hate him. 
Speaker 1 00:30:22
But he's he's a trip. Yeah, I think, uh, uh, he's uh someone to stay close to because you can make money with him. Yeah, Then you have to know like, uh, you got to know that you have to deal with a certain amount of his bullshit. Right, right. So yeah, Like Ronnie, uh oh yeah yeah. He does a lot of work with him, man, one of his main clients. And.
Speaker 1 00:31:22
I still got it. I think so. I have them in my freezer still. Really? Hey, I'll bring you next time. Okay. I never know when I'm gonna come by. Yeah Usually on Fridays Yeah All right, well this is a blessing that you're here on a Wednesday Yeah, I know, right? All right dude See ya Thanks Thank you So this And. Then we're gonna send it over the approval for the. I actually got it right when you were walking up Thank you! I said see this is great They already approved it No he's not. 
Speaker 1 00:31:52
Hey, it only happened because I copied in Bella and Eileen. Um, so if you really like her. I never have heard him laugh before. I got two once already. So, I mean. But so part of the reason I did is because like our contact allowance was twenty twenty five bucks a foot, You know that actually this is about fifty five dollars a foot on top of that. But then this is ten dollars. 
Speaker 1 00:32:24
I put it in there. So this is in a change order. What's this? Three by three. Okay. So this is two by two, right? Everything else on the whole job was three by three. Okay, so you don't have a jointer I'm asking about, but that's because.
Speaker 1 00:32:55
So, two by two tiles on top of the small wall, then three by three everywhere else. And like yesterday, I was gonna fire you and realize I was wrong. So now we have this in our chain door. We got three by threes single bolt holes outside corners, Two by twos single bolt holes outside corners throughout ladder, three down to the right for block, though. So that's basically something. Um okay so well yeah so this is essentially. 
Speaker 1 00:33:25
This this layout, I don't know what the width of the existing strips that go between the houses are. So it's possible that if the stones are wider, they're going to want grass here at the width that is. The stones if it's wider, it needs to be wider. It might not align with corner house. I don't even know if this goes to corner house. Yeah. And then grass. So this essentially you can't have these floating, but you're going to have a straight.
Speaker 1 00:33:56
Like pedestal deck. Mhm. Oh, they have pedestal deck great. So you want to see that? No. Okay. That's the reason I only drew it like this. I think we need to do artificial grass that looks like or grass, make this look like real grass, maybe make it look like the actual wicks that are out there? Yeah. Not. no. I can get this in both for you, so you don't have to go out. Um. This is that rake stuff Stone, big stone here, rake stone going down. The top one is the polished one. Hey. Hey, what's up? Sorry. No, I'm sorry I was looking at something on the job site. No, put that. Okay. Plus and what about same thing on the bullnose?
Speaker 1 00:35:03
Three sixteenths or thirteen sixteenths? No, thirteen sixteenths is uh five eighths.
Speaker 3 00:35:12
I think they probably meant three. They. 
Speaker 1 00:35:17
Can do an eighth. We want this to be an eighth, right? You said their standard grout is three sixteenths. Yeah, she meant three sixteenths. But that that's actually the reason that, They do thirteen sixteenths on the tile. It's three sixteenths grout joints, so one and thirteen sixteenths plus three sixteenths gets you two. Okay, um, yeah, I need to get back to you on that. We'll figure it out today. Okay, all right, thanks. Bye. So you got.
Speaker 2 00:36:01
If everything else is an eight, sorry I won't talk to you.
Speaker 1 00:36:10
So, you got seven times one and thirteen sixteenths equals one, eleven, sixteen plus five. 
Speaker 3 00:36:22
Two six.
Speaker 1 00:36:50
We did these at one eighth inch joints. Then you get thirteen and seven sixteenths, so about thirteen and a half. But that only works, you're going to have to figure out parallel lines. Parallel lines, see where your wide points are, see if that's enough, right? Because then you got to off of that subtract the thickness of this tile. You're thin set or water proofing or no waterproofing.
Speaker 1 00:37:20
From base of this, it's just bent up tile plus whatever. Like in any porch here,
Speaker 2 00:37:27
It's blown out. It's pretty straight. I think that's okay. Doable. That's one thing we looked at earlier is like let's check this one.
Speaker 1 00:37:34
And that one, Check both of those and say all right, because he said he can do eight or three sixteenths on here. I think three sixteenths is too big especially if everything else is well, the only horizontal surface though, So you won't really notice, really. Right? Like all this most of it will be covered. Right? You'll do it different, But But, we can always still call this because it's not really just we would have to know for this alignment where that ends up right when we're cutting these. But I think we can still do But I think we figure this out now and make sure.
Speaker 3 00:38:22
So thirteen and seven sixteen.
Speaker 1 00:38:55
I make it easier. One inch, two. Yeah, one plus three eight to sixteen. Yeah, eight nine. That's cool. So and then you're you're basically you could potentially add six sixteenths so three eighths to this so thirteen. So your other option is thirteen six thirteen thirty sixteen I think you have six grout joints, you can add another sixteen times.
Speaker 1 00:39:26
Six sixteenths, Six that's thirteen, yeah, so you can get thirteen and seven sixteenths with eight or thirteen and thirteen sixteenths with three sixteen. I think we can figure it out but he said they'll make it. They would have he's like it's a good thing. You said it because they're going to make it with three sixteen. Oh I need to tell them I want this with eight. This is the only thing that mounts these. 
Speaker 2 00:39:56
Did you take it back? Did you take. 
Speaker 1 00:39:59
Your tape back? I could have left it. Oh, it's right there, man. No wall.
Speaker 2 00:40:07
Oh yeah.
Speaker 1 00:40:45
Twelve and three eighths. That gives you one inch, so that gives you a half on each side. How big's your tile? Uh, five sixteen. Ten sixteenths is that? Five eighths. Twelve and three eighths plus five eighths is twelve and eight eighths, or thirteen.
Speaker 1 00:41:19
So that gives you three sixteenths plus a thirty second. A pin set, you don't use that. Eight. As long as it's square, I think it works with eighth inch grout. Square and doesn't flare, right? Like that looks like it bumps out right there at that corner where the step is, right? So like, yeah, it comes out. Those are the things that threw us. But then again, we're talking about the bottom of this, the bottom two inches of this at the corner. But that should be in the tile line, right? But if we're too tight with uh tile when the plaster guys do it, that'll be a weird detail where they sort of build that out.
Speaker 1 00:42:22
But then again, this just didn't. Probably work for eight. I think we should verify. Unless you want me to just make it work. I can,
Speaker 2 00:42:40
You know, I can make whatever you want work, but I mean.
Speaker 1 00:42:47
Well, I don't want to delay the trial anymore. Well. Let me know today. Okay.
Speaker 1 00:43:03
All Right, so then this essentially, yeah, so this but it's not so this will be that polished stone. Can I color that blue? Yeah, you can color it blue or green.
Speaker 1 00:43:35
Those stones are a lot bigger, right? It's like six inches and maybe eight inches. Yeah. So um and this is just the top man. So the top is the same material, but polished right right with the exact same, but finish right um stone's going to be this stone all the way.
Speaker 1 00:44:04
So that stays down. This. What? Yeah, yeah. So then on the other to this side, you have this, then this, then this. This and this are the same. Inside of there is this also. You got your roof? Oh maybe it's just colored or they just colored it? I think it's colored but those can be blue. 
Speaker 1 00:44:38
And then that. I think. This is where it gets complicated. I think, that wall should be blue. Yeah, okay, yeah. But it ends. You know, it's just here. Go to the other side. How did they draw it? Yeah, oh, this is good so. And then this.
Speaker 1 00:45:39
The same as the floor tile. So, what we need is we need this to be full of water, spilling and looking like water's coming down, right? And then zoom in. Then this is full of water, right? Right here. But from here all the way across spilling down. So the water goes into here, and this is always full. And then that goes into here. And this is full of water to a certain point. You don't have to show that, But then we need to just artificially show a strip of fire with little four or five inch flames coming up like a little fire pit coming out of this slot here. Okay. And then that's it. And then obviously show this stone, no, this one doesn't have fire. Okay. We want the fire on the other side. But you can make um. 
Speaker 1 00:46:31
I think we need to go ahead. What are you doing? No, I was just positioning those. Oh, it just colors the whole thing. Yeah. Oh, because I didn't ever make that material. So then this, I would do. 
Speaker 1 00:47:02
Hey, How are we doing on the plumbing schedule? Poorly, but okay. Uh, can you tell me what we're talking about today? He was supposed to finish something Tuesday for an inspection and he's still there. And then he wants inspections on your second layer. So, are you ready? Did you get all the beams cut out and Yeah, they're done. Ready to rock and roll? Yeah. Are you sure? You don't have more to do. Let's go. No, just go look at it. Hold on one sec. Yeah, no, you're good here so change that to eighteen and this one is twelve. This is something like that.
Speaker 1 00:48:29
Something. So then we'll make them all like this, right? Eighteen six, eighteen six, right? So, you should be able to just make all oh, these were oh nice, that's good. I didn't make those unique.
Speaker 1 00:48:53
Oh Look at that. That looks better so we just. 
Speaker 1 00:49:01
That looks more like. I already feel it.
Speaker 2 00:51:11
Yeah, So the flow for the track. Three inches down instead of pile.
Speaker 2 00:51:26
Okay. Yeah, because this is three. Right. That's that's good because you have. Oh yeah, it's oh yeah, I I can see it from from here. Yeah so hmm? It's one sixteen. Uh up yeah. Yeah so over there it's. 
Speaker 2 00:51:56
Maybe one eight block. Well, we also need to go wider here. You want to do it the same? How do you want to do? You want to do this then the top?
Speaker 2 00:52:29
We need to check for square. Yeah. So, what is the distance? There to there? There to there? And the same, there to there? Yeah. I would say get. There to here?
Speaker 2 00:53:02
You need it perfect. I do it here, here to here, and then to here. Huh? Yeah. Huh? Yeah. So because we need to make sure so load it properly. I think this is close but that one maybe closer. I know both First, let's let's find the measurement there. So there. There to here, to there. And then I can tell you, because it might be might be thicker here and less here and and you know, and thin here. You know what I mean? It might be.
Speaker 3 00:54:02
You can see uh.
Speaker 1 00:54:07
See Metal or what? Well, we just know it's there, right? So this was a wire from here. You can see the wire went here, here, here and that's a hole. Yeah. Yeah.
Speaker 2 00:54:27
And That one's probably in there somewhere.
Speaker 1 00:54:36
Alright. I think this one's dead. Um, just this all the way. You should be able to mirror that out with this out, right? Somehow? Yeah. Copy it, flip it. Yeah, that's what I. I did. I saw that's how you did the other side. Like so probably what he wants to do is just work on that side.
Speaker 2 00:54:51
Yeah, no, that's perfect. Um help me out here again, because I know this is blue, but then we're thinking they're.
Speaker 1 00:54:56
No the floor so everything on the floor once you. The floor is all BC Pro, Okay. So, this is the only thing that just goes from here down to the floor, and then everything else inside is D C Pro. Okay. We'll have all threads holding the grates there and everything, but. So just to hear that. The stone on that, I would go.
Speaker 3 00:55:41
You're doing it wrong. Keep yourself slow.
Speaker 1 00:55:51
But this is really being aligned there, right? With the nose of the coping.
Speaker 1 00:56:18
But I would say that that stone is just the group of stone. They're going to see it there, they're going to see it here, they're going to see it down there. This might end up with a channel, same channel or something like what we're doing at Goldenrod. That's probably the better way to do it. I don't think it matters for this. He's not going to actually be able to see exactly what this is right? But this will have you know an eighth of an inch, Water going over it and then down the base, which will make some waves, right? And then this will have fire. There's a company that makes these to be submerged. So it comes with fire out of the water. But, if we could finish this, and this from, like, uh let's say, like rudimentary, like, uh just basics, right, have the finishes on just to show them like, hey.
Speaker 1 00:57:16
We have actually, cause like if you take this piece.
Speaker 3 00:57:33
This thing.
Speaker 1 00:57:41
Like if you look at all the complexities, and you can't build it like in a shop. Have to go put it in place. You're gonna have to put extra supports. There's gonna be all sorts of extra stuff by the time you do this piece of stainless. And he might be like, I don't and I don't tell him that. He's gonna say, I don't care, it's not up to me, which I get it. But like that thing, right, there is going to be mirrored on the other side, right? And, it's these wings are half inch steel to support the stone. When you got the thing on one side on the drawing somewhere or change it somewhere else like dude, I can spend. 
Speaker 1 00:58:16
Days on this thing,
Speaker 2 00:58:17
Right? Yeah, no, It's sometimes like you know, I spent an hour and a half on the little that I did last night. Yeah.
Speaker 1 00:58:27
Oh here here, oh here, this is the other thing. So I connected this right. So this ends here, but I extended these stones over hit it right now. But the this angle and this angle will have to be the same. Right? It's gonna have to looksymmetrical, right. I don't know that it is. I actually didn't. 
Speaker 1 00:58:45
Draw it with the intent to make it that way, like I was focused on this different spectacle. But from the drawing standpoint, for what he needs to see right now, like at least like he's bugging me every day. Like I just need him to see that we're actually working on this thing. Right? Like here here's a finished drawing with the stones in, with all this in colors, the actual materials.
Speaker 3 00:59:31
So, assuming.
Speaker 1 01:00:34
As of now this tile there's none of this on the new side. 
Speaker 1 01:01:03
Existing one that we're ripping out all the stone to make this. Right. Right. Actually, I can write. Right, and they're actually not going to remove that. So they're going to leave the stone on the base, the stone on the top of that infinity edge, and the stone on the base of that little overflow. They're only going to demo the polished stone underwater. Okay And then they're going to remove all this stuff in front, so make it. So there's no more black polished anymore, because technically that stuff's all black granite some sort of black. Granite polished, but the stone on the edges is a blue. Some other right. Um, sorry.
Speaker 1 01:02:04
So this is stone they're going to use. Or that they've already used. So we can take this and probably ways to use that. I'm going to find out the theme of the other stone. Okay. Oh, by the way, MOCC. Yeah, I know, I know so that Carlos uh Drew Mason That's a good way to say his name.
Speaker 1 01:02:52
Hey, what's the name of that break stone that you're using on the affiliated wall? You know, Brazilian blue. Okay. We're trying to get all the I got the mocha cream, I got the glass. Just trying to get all the materials specifically, so you can craft it in there properly. Brazilian blue is it Do you know if it's a granite or. 
Speaker 1 01:03:24
It's a granite. Okay. Where do you guys get it from? Stone land? Okay. It's not blue stone though, it's just. Stone Mart? Okay, alright we'll try to find it. Alright dude, thanks. I'll follow up with you. I think that's it. They're still back? Alright thanks man.Yeah.That movie?It's a brick. 
Speaker 4 01:03:55
I didn't even.
Speaker 1 01:03:57
Hey, um, my wife does this all the time. I can see here. Yeah, that's it. Any of these exterior penetration? The two that you have over there, maybe coming out of the chamber cover bolt? I don't need to waterproof something on the outside, do I? No. Okay. Can if you want but. Oh, that's a big gap. Better safe than sorry. Yeah, you know it's the old adage. Okay, That's it. You're so good. Yeah, I'm coming here. You missed something over here and I went, oh, see if there's something that want to Does he know that? Did, he already fix all the holes we put in the deck from our framing? Did he know to fix those? You talking about coming out of the mechanical room? Talking about waterproofing guys. Look. They're all covered with tape now That's not the waterproofing guy Okay, I just.
Speaker 1 01:04:53
Make sure.
Speaker 1 01:05:26
So then try to find this.
Speaker 1 01:05:52
So We got a Polish one.
Speaker 1 01:06:20
One thing. uh on this side I used two, this side three. okay. I just never really learned how to type. Um my mom took all those typing skills, and now my wife types really fast. dude last night last night I was Doing this at the dinner table, 'cause Alyssa went to uh church, and we got some biking something. We'll stay with Dale, put it down. We forget, dude, that's right. We need to have like seven by the time we get home. It's like eight, thirty and nine for our kids to. I'm so interested but don't mess with it. So I'm sitting here doing it right you have to use the home keys. I said, no, baby, come here, look what I'm doing, 'cause it was all with the mouse. Right? But do you know the home keys? She's like yeah. 
Speaker 1 01:07:18
And I said," Are they these?" And I put my fingers. It's like," Yeah, there's got to be the H and the G." Okay, cool. I said," You guys feel this?" Yeah, there's a little button there where you can feel where your fingers go. You guys got it. I said," You guys could probably type faster than me." So you might not find something. 
Speaker 2 01:07:37
With the groove in it. Um.
Speaker 1 01:07:44
So we might have to figure out a way to. Not heard. If you finish it without, I can send it to Drew to show him what we have. It's really the point that you actually have a problem. But maybe. It felt great, right? Yeah. Okay, I can find a cat or but you could even go, you know, Three eighths down three eighths in three eighths down three eighths in and make your hole. But then when we want the water when it's flowing down. 
Speaker 1 01:08:17
Look like it's white water. Right? So those grays, Those grooves make it pick up air and put that little detail on the face. So it doesn't look like it's just a wet wall running down.
Speaker 3 01:08:53
Yeah.
Speaker 2 01:09:25
There's a fresh roll of toilet paper in there. Um, you think it's always Monday?
Speaker 1 01:09:33
Yeah, I mean we can get out of here. Make sure obviously this is done for the next stage. Right. Get this Yeah, no worries. Both are running one day next week as of right now. Um But. 
Speaker 2 01:09:54
Do we need to finish these before we head out?
Speaker 1 01:09:58
I guess it depends on what time. Might not be a bad idea. Um, they're not pushing yet. They're not pushing yet, so. Yeah,
Speaker 2 01:10:09
I mean, I'd obviously prefer to. Yeah, you know,
Speaker 1 01:10:12
I guess. Yeah, i don't yeah They're not pushing yet. And then having guys here working on this and Hunt's still not being here helps us with the optics. So.
Speaker 3 01:10:26
I don't remember.
Speaker 1 01:11:03
Oh, that's what I was going to say. So over there, they approved detailing the coping. I think we should get that done before we go over there. Yeah, but I'll find out. So if I schedule, I was thinking about that this morning. Oh, we're going to go back over there.
Speaker 1 01:11:37
Eight Inches minus three, so two inch difference. He wants eight inches on the four side. Eight and four. So, yeah, so four and a half right now? Three inches, three inches. No, we're oh up at the top. Yeah at the top. So, but the top doesn't matter, it's really that eight. So we shoot for the eight We have one inch there. It's gonna give you two and something, and then you're gonna have six. So yeah. I would say you make the bottom whatever that cut piece of tile that's, you're gonna cut that tile, whatever's left over, we're gonna use over there. And you're gonna have two three-inch tiles, a grout joint and then that waste piece over there. And that's what it and then that tucks underneath this one. So probably a foot to your right or. Okay so I can make that one as thin as. Yeah. Well now.
Speaker 1 01:12:34
Cuts underneath too, right. So yeah, no, no, I was thinking. Yeah, the top can be whatever. But it's really so you got two three inch style or two and thirteen sixteenths eighth inch, two and thirteen sixteenths eighth inch that's quarter plus yeah, six, six and a quarter plus if this is one inch. Is that what it was? That piece, one inch. No. And then you got one and something there. Yeah, it's going to be probably seven eighths,
Speaker 2 01:13:13
I think, because you've got. You got your eighth- inch joint.
Speaker 1 01:13:18
You're putting an eighth- inch. I don't know if they ever call it an inch and quarter;. That's going to put it just under eight inches about. And, then we can even cheat that with the grout joint. If we had to;, we could have the grout joint on the horizontal surface to get that spacing.
Speaker 2 01:13:35
My honestly, my biggest thing is I don't wanna route. I don't wanna float point five eight.
Speaker 1 01:13:43
So yeah, yeah, yeah. So so I think you'll be fine. So, if you find out what that waste piece is and plug that into this model picture here, You got your two full tiles that you know your eighth inch eighth inch here. And then this grout, this piece of tile is whatever's left over from that. And if you're not at eight yet, you can push, This vertical service in more. Show more grout. Nobody's ever gonna see it. Or, you go three, six, nine overhang it. And that's three full pieces on the bottom overhang with the vertical and use that waste piece to be the back side of the front two.
Speaker 1 01:14:59
Yeah, I Think.
Speaker 1 01:15:04
I don't think you are going to have. What do you have now? Seven eight, and we're not going to give them eight. So we're going to give them this, this, and whatever this piece is, and that's what it is. And this is going to be a tight flow piece that can go here. We're going to do that too. It just. I was in your thing.
Speaker 2 01:15:47
Free. The biggest thing is the uh. Malibu. Oh, Malibu. Yeah. Okay, I was getting on a drawing. Like a it's called a rendering? It's uh.
Speaker 2 01:16:41
Yeah.
Speaker 2 01:18:07
Probably. No, just in case. Oh, like a. Sandblast? Yeah. So. Oh. Porqu é t ú no tienes.
Speaker 4 01:18:45
Note gusta? Porqu é t ú no es. Porqueelzapato es no por privacidad es como.
Speaker 2 01:18:56
That's interesting. When at in cuando hay uh 20 a ñ os?
Speaker 2 01:19:35
Yeah.
Speaker 2 01:20:07
Oh, um. We need to check the wall there. Um, because it's a crack, right? Check with. Uh. It's the part near Brandon. There is a crack. Brandon? I think so.
Speaker 2 01:20:38
We can try.
Speaker 3 01:23:13
Okay.
Speaker 2 01:23:43
Hey Brandon. And on this side as well. We're going to waterproof that whole thing.
Speaker 3 01:24:57
Yeah, I figured you would.
Speaker 3 01:26:26
Here it is.
Speaker 2 01:31:17
The uh the other pressure or is this the one that leaked on? Yeah, this got stuck. It's like uh in a certain point. The sprayer's not working? Yeah, it it works. It's just like a trigger stuck on. I think there's a setting for that. Is it? Yeah, but I mean either way they're both leaking right? I didn't use this one. Hey um London yeah In. The morning was this one leaking? No, it was just when you when I let off the trigger the water kept, Blowing. Oh. Yeah, I think they're, I think I need to replace them both. So. Yeah,
Speaker 4 01:31:55
And then this one's not leaking so well It shoots out through here. Mine found the other one had like a uh plastic rip, so you can stop,
Speaker 3 01:32:04
But it still shoots through here. Bent. Are. 
Speaker 2 01:32:12
You gonna take these two or? I'll I'll take one, Let me take the other one. And so one. Let me take that one. And uh, I'm done. That way I can show them here's what I have. Right? No, I want to take the one that's leaking. Oh, okay, okay So if we could load that in my truck.
Speaker 2 01:32:56
So This is a regulator for the pressure. I was wondering, but I think the other one doesn't move at all.
Speaker 2 01:33:21
And Then this. 
Speaker 2 01:33:23
Which one was? That's the other. So that's the one that we can't keep on all the time. Right. Yeah, 'cause that one looks fine. This one's not releasing pressure like it's supposed to. So, okay. Um, I want I wanna go on It doesn't have one of these guys on it. Okay, got it And I'll buy another set of them but I want all Connection. We have like three sets on that. Of these things? Uh-huh. Three extras? Mhm. Okay. Yeah, so whatever hoses we have. Oh, I had a hose in my truck. Um. It's the one that you gave me the other day. Right. You don't need it anymore? No, We we filled up the pool. And so I just had it threw in my truck.
Speaker 2 01:34:22
Okay. Uh, 'cause this was right. I could take this right now. I already unplugged it.Okay.Um.And.Good time.Okay, well let's wait a little bit. Um, 'cause you're gonna need a second person. Um,I want to finish what I'm working on right now and so. How are you. How are we labeling them?I got to label these, but.What are you going to label that one?Uh, this is vacuum uh pieces. The spacers and that's covers. So okay, remember, let's keep it broad. Yeah. Good I like this safety equipment I like to keep it broad, right, waterproof and mixing. Uh, if possible. Yeah, this is going to be tough.
Speaker 2 01:35:42
Today I want one. I'm tired.
Speaker 3 01:39:47
Thank you.
Speaker 3 01:40:55
Here To Here.
Speaker 3 01:41:14
I'm going to go ahead and turn this off.
Speaker 2 01:41:42
Okay, so the only variation is the wall. Right, but the wall's not. The wall's different. Twelve and a quarter. Twelve and. Right? Twelve and an eighth. Yeah, right? So. So But if we put But if we put three-eighths inch on both sides, muscle manals? It's fine, right? Yeah, half inch. Okay.
Speaker 2 01:42:30
Is It equal at this point? Yeah, it was equal. Yeah? So then I think the flow here is. 
Speaker 3 01:42:47
So then let's make these. 
Speaker 2 01:42:49
This way. Equal. Yeah, it's more of an approach. Right, Well, what yes, but what I'm saying is the so here there to here, maybe right, six feet, three inches, eight, eight, six feet, three inches. Okay. So yeah, perfecto right. And this one is different, right, yeah. So the tiles are. One and seven eight and an eighth inch for two inches. So yeah,
Speaker 4 01:43:44
I don't think it's complete.
Speaker 2 01:43:47
Peace.
Speaker 2 01:44:22
Yeah.
Speaker 2 01:44:51
So, yeah, you know.
Speaker 3 01:46:17
Thank you.
Speaker 2 01:49:02
Need a tie in. for the sink. yeah, into the uh. yeah, bolt, yeah. So I'll let from my friend in Chicago pull out the float, so he clean it. So we need to, he said that the bolt is uh membrane. Yeah.
Speaker 2 01:51:25
Um. So. Una preguntaque la hayan es m á s grande all á, ¿ ven?
Speaker 3 01:51:42
S í. Alright.
Speaker 3 01:53:01
Okay, please.
Speaker 3 01:54:22
Okay.
Speaker 2 01:57:37
You want to start setting these and Brandon can finish those.
Speaker 2 01:58:10
Five six. 
Speaker 3 01:59:10
For monsters, many things. Yeah. Hey, you don't you don't get a gift with no monsters, right?
Speaker 2 01:59:39
You know, when I was going through the stuff, I saw a few things that were missing. And I don't care about like. Can you send it to me like nine o'clock? Not that you do. You send it to me like nine o'clock. It's like. What am I going to do with this? Well, it's better than tomorrow morning. But, like when you guys send them to me during the day, what I do is I order it at Home Depot as a. Order it and then I walk in for the customer service thing. I go, can I have my order? And then, I'm out.
Speaker 4 02:00:39
Okay, so look, what guys? So get the brushes, sponges. We have one in the bin. That's things. Uh.
Speaker 4 02:00:56
Oh Gloves. Huh? Yeah yeah yeah I know how to take it.
Speaker 2 02:01:03
Yeah so make sure when you put like gloves. 
Speaker 2 02:01:08
Uh, gloves. Are we out? Out? Yeah, there's none of those. I'll get some on my truck. Oh, okay. But I mean send them anyways, so that way I'll I'll pick some up because I like to keep them with me just in case. Cause I need it sometimes. Alcohol. 
Speaker 3 02:01:26
We're set, everything that's outside we're set with that but there's only like two of the.
Speaker 4 02:01:34
No so.
Speaker 2 02:01:36
Those aren't available anymore, the little ones.
Speaker 1 02:01:38
Oh, you're serious?
Speaker 2 02:01:38
Yeah, so that's why I got the big ones.
Speaker 3 02:01:40
Oh, okay then we'll go with that.
Speaker 2 02:01:41
So they're not they're not available. So we're switching to those.
Speaker 4 02:02:07
Really, a I just can't.
Speaker 2 02:02:50
How do you get it from.
Speaker 2 02:03:31
So remember how I said let's get a vacuum setup each day, thirty feet or whatnot. We'll see where it kind of takes us. Um, we need more oh shit. We need more of the you can't work with this right? The hose again yeah. Did you check in the vacuum?
Speaker 2 02:04:01
Vacuum parts right here. Vacuum? This is yeah, it is me being picky but just so we don't look back. Vacuum was two units. Right here. So you have vacuum over there? And you got vacuum parts here? No no, I was just looking inside the vacuum, the actual vacuum. Oh I see what you mean.
Speaker 1 02:04:26
Gotcha gotcha. 
Speaker 3 02:04:31
Some up there. no anymore. Nope, it's just uh okay.
Speaker 2 02:04:48
Let's uh but to my point, right? You get the vacuum up there, get this, you just go vacuum real quick. Right? Right. And then I'd probably pressure, Watch that so nothing sticks. Sure, quick. Gotcha, I'll set it down. And then these guys, we got a. I would. let's keep some. the bucket of water that you can put this in every single time. Got it? Alright, keep this in water all the time. I'll get a little scrub guy to here with a brush too? Yeah, if we don't. if we do it every time then we don't need to. Right? You see how we're just like. And that's the red one in water is like I shook it out earlier as well. But.
Speaker 3 02:05:31
Yeah.
Speaker 2 02:07:45
Hey. So the pH is at five eight, and chlorine's fucking out. Um. What is how many gallons are in that pool?
Speaker 2 02:07:57
So, the Orinda app told me to put 1.3 gallons in. I'm not at that five-eighths.
Speaker 2 02:08:31
Okay, Before you just turn it on. Oh, he takes the valve off. The board is very free out. The AquaLink is in auto. So the pump shut off while I was here. I put it in service. This needs to run nonstop for three days.
Speaker 2 02:10:33
He said the data set up with CO two turned all the way down, seven point seven five. Since you showed a pH of eight six this morning when you tested it, I would assume that it wasn't working at all or was just timed out. Sam isn't starting.
Speaker 2 02:11:03
So what should I have done differently?
Speaker 2 02:11:26
No, I tested it. No, I tested it. So it's possible the tech controller is off, but I doubt it's that.
Speaker 2 02:11:53
No, I did it. I did it based on my on the spin test. Yeah, because I mean, I reran the or end it like you would have needed four and a half gallons from order toum you know. So.
Speaker 2 02:12:38
Okay. Alright. Alright, thanks.
Speaker 2 02:13:33
Okay, But five dollars every time I bring water too.
Speaker 3 02:14:07
Are you going? No, it's Luga. Luga. Thank you.
Speaker 3 02:17:09
The Marr ó n? Is it with the. With the.
Speaker 3 02:18:15
Let's go.
Speaker 3 02:19:06
Thank you.
Speaker 3 02:20:31
Dogs barking. 
Speaker 2 02:21:35
Nothing really but solving proving to something something to Cory that I already. 
Speaker 3 02:22:19
I'm going to go.
Speaker 3 02:25:35
I have a lot of money.
Speaker 2 02:28:11
You guys going to lunch right now, Brandon? Okay. You guys going to lunch right now? Yeah. I think I can get you to help me uh. Were you guys already at lunch? No, how do you even clock out here? Okay. Well, I. take that to my truck. Okay. Oh my. You know. Yeah, I'll help. I just uh. I'll take the uh. the hoses out, The hose and the gun out there first and then come back and help you with the machine. Yeah, I mean i- i can be helping you in the next. 
Speaker 3 02:28:41
Go for it.
Speaker 2 02:29:10
You want to help me with the pressure washer and then we can talk.
Speaker 2 02:29:41
Put it on your shoulder.
Speaker 2 02:30:07
Oh, Even better.
Speaker 2 02:30:12
It's even better. Yeah. This is my best work yet. It's never been easier.
Speaker 2 02:32:16
I Told him. Hey, can you get the clothes out of my truck? Okay, yeah, yeah.
Speaker 3 02:32:36
Here we go.
Speaker 2 02:32:44
So when they plaster. Because they put it like that. Oh yeah. So it floats. So, no, it's in the. In the bottom. Oh yeah. Yeah? No, is that it? No, I'd not in uh. Yeah? No. See? Don't you.
Speaker 4 02:33:12
Oh no no. 
Speaker 3 02:33:17
Okay. If not, I forget.
Speaker 4 02:33:59
Yeah, No, I. I talked to him.
Speaker 2 02:34:20
It's a long conversation. Yeah, I know. So, well. Does it have to be Oh, you know, Is there a way You know to get him there? Some You know I got a couple ideas. But You know Okay okay It's good information Let me think about it And. So.
Speaker 2 02:34:51
I was going to hit him like tomorrow. Um, so I was going to talk to him again because I talked to him. One week after you and I talked, I talked to him because that whole week he was mad. So, um, let me. And I didn't want to put him on the. You know what I mean? Put him on the spot. I didn't want to ask him here because you were there.
Speaker 2 02:35:21
You know. Yeah, I know. So, um, but I need to talk to him again. Um, let me maybe ask again tomorrow. I'll ask him again no matter what tomorrow. Yeah yeah no No, I I know, but I don't wanna push it because yeah, no, if I push then is is i i know, but. But I did I talked to him, I even, I even the reason why Rick is so. So I told Rick, I said hey, I need to get. You know, trying to help Manny. You know so talk to. Talked to Manny. So that's why Rick, hey, man, how are you So? I'm kind of working all angles. And then i told Cory say, hey, Rick likes, you know, talking to Manwa really.
Speaker 2 02:36:19
Okay. So and then I talk a little to puncher. You know so. I think,
Speaker 4 02:36:29
Yeah, no it's it's okay is, I know yeah, I think I I think yes it's okay for operation. It's okay because my me area is. Next week is, I know it's, pay more pay. Yeah no, I don't know. Yes.
Speaker 2 02:36:55
You you're you're hoping for more pay next week? Yeah yeah. Yeah I even in in the weekend uh, in the fin de semana, I research and say oh maybe it's possible they sponsor us. You know so maybe we can make it. 
Speaker 2 02:37:22
It's going on. You need a certificate, like a school. Hey, you know, go to school only for these jobs. It's not nothing for construction. You need architect or yeah, You know, so I'm I'm, it's for me. It's the most important thing for me when I am trying to.
Speaker 4 02:37:54
Yeah, I know. Because. My yeah, you knows my yeah this. It's good. Yeah, uh huh, Yeah, all the time is all the time is very good that they oh this one oh doing doing. Uh huh you can do it then or every night. Nigga, That most the flow she's, but for the flows provide, you know I do it.
Speaker 4 02:38:24
I want. Yeah,
Speaker 2 02:38:41
So right now, so I think. As an in so leader is different right yeah, so. My idea is okay. My plan. You know, two years, right? Uh, I'm okay. First is a student, right? Right? Then after that. A teacher, right? Teacher. Right? Hey But you know not even teacher it's uh leader, right?
Speaker 2 02:39:23
Super, or lead, right? Hey. No, it's better at you know at leading everything. He's he's this close. It's working good. You set the strips, stay slow, right? And you know once it was very slow with you and Renee, right? Because Renee can't float. So, but once Brandon and Alec came. He he came. From a gun? Yeah. Oh, okay. So, I know you didn't expect that. So I know your work is and just so you for me. I told him it's better.
Speaker 2 02:40:24
For him to keep you, than to keep me. That's what I told him. Said, if you want to grow the company, then me, right? But if you want him not me, I'll go. So no I but I said that. Right? So really? You know, I feel good about it, but I don't want to tell you anything. That's tomorrow. Yeah, that's good.
Speaker 4 02:40:56
Yes, it's good. Yeah, yeah.
Speaker 2 02:40:58
I know you're waiting, you're waiting, you're waiting to do I say something? Do I not? I understand. Yeah is because is. 
Speaker 4 02:41:24
The company. 
Speaker 2 02:41:41
For your brother.
Speaker 4 02:41:42
No, no, it's other company. My brother is different in. This is otra persona. With, with him.
Speaker 4 02:42:22
Yeah, that's good. That's yeah, yeah. Oh, is the oh yeah. I can speak, yeah. Mhm. My boss is called Este you, you can little by little, you say You you, you can pay pues cobrar cómo es cobrar Pay is pagar Cobrar is. ¿Pardon? Cobrar It's about.
Speaker 2 02:42:57
You Give me my money. Yeah. Oh, um, let me look at it. Yeah.
Speaker 3 02:43:10
Collect. Collect.
Speaker 2 02:43:16
Oh, three hundred and fifty dollars? Three hundred.
Speaker 3 02:43:35
Yeah, Yeah. This is true. We can do it.
Speaker 4 02:43:56
Five thousand. Five thousand.
Speaker 4 02:44:25
5, 000 per week. Yeah, it's oh it's has. It tiene m á s trabajos. Yeah, pero yo llevo ayudantes. That's it. Ah, Yeah, you could.
Speaker 2 02:44:36
Yeah. Yeah okay. So you you pay the. 
Speaker 4 02:44:38
The helper. So okay. But if you can't get a job and because he is plumer and is para porque es un, big casa grande de that, that you go there, the boss, the kids.
Speaker 4 02:44:57
Yeah.
Speaker 4 02:45:27
I went with him to that party. It's. 
Speaker 4 02:45:37
Like A birthday for everyone because it's like a company of, oh, this one of plumbing, tile, roofing, everything. Everything has those things. And I say I can do it. That's why I.
Speaker 4 02:46:07
I don't want to leave here. I want to be here because, well, a different journey is starting. But. 
Speaker 3 02:46:28
There will always be.
Speaker 4 02:46:33
That's why many questions.
Speaker 4 02:46:39
Yeah.
Speaker 4 02:47:09
I want that to feel. You want to stay here, yeah, yeah.
Speaker 2 02:47:38
More money. Yeah,
Speaker 4 02:47:40
I need it now. Yeah, okay. We we can or we'll have to okay. E st á bien yo yo. 
Speaker 2 02:47:49
S é， no s é I know, I know. So yeah, okay, how how talk to him again tomorrow and I'll talk to you? Yeah okay, okay.
Speaker 2 02:48:09
Oh, I'm so full.
Speaker 2 02:48:54
Two miles.
Speaker 3 02:50:13
I'm not sure what the name of this is.

[AI_SUMMARY]
The coordination meeting focused on the construction of a pool and spa, addressing intricate details such as tile sizes, waterproofing, and the integration of water and fire features. Key discussions included the importance of precise measurements to prevent overflow issues, the need for reliable installation teams, and the balance between cost and quality. The team emphasized field verification over vendor specifications to ensure functionality. Personal dynamics were also highlighted, particularly regarding team member Manuel's career development and compensation, reflecting the team's values of responsibility and integrity.