# Session: 2026-04-09 02:31:04 UTC

- **Session Key**: agent:main:main
- **Session ID**: 10348eca-3fbd-41d9-931c-45e27156cca7
- **Source**: webchat

## Conversation Summary

assistant: NO_REPLY
user: Conversation info (untrusted metadata):
```json
{
  "message_id": "4711",
  "sender_id": "8032472383",
  "sender": "Braden McLeish",
  "timestamp": "Wed 2026-04-08 14:58 PDT"
}
```

Sender (untrusted metadata):
```json
{
  "label": "Braden McLeish (8032472383)",
  "id": "8032472383",
  "name": "Braden McLeish"
}
```

Dorian — model pin change (recovery + correct application)
Context: Braden attempted three per-agent model pin changes and the commands misfired. He ran:
openclaw models --agent ops-maintainer set openai/gpt-5-mini
openclaw models --agent research-intelligence set openai-codex/gpt-5.4
openclaw models --agent systems-architect set openai-codex/gpt-5.4
Each command reported Default model: <model> and wrote /Users/openclaw/.openclaw/openclaw.json with ~31 changed paths. Verification afterward showed all three specialists still at openai-codex/gpt-5.4-mini — the per-agent pins did NOT change. Instead, the global default model was overwritten three times and is now whatever the last command set (openai-codex/gpt-5.4). A backup exists at /Users/openclaw/.openclaw/openclaw.json.bak but it only captures the state from just before the last command.
Your job: recover from this cleanly and then apply the three pin changes correctly.
Step 1 — Discover correct syntax (read-only).
Run:
openclaw models --help
openclaw models set --help (if that subcommand exists)
openclaw models --agent ops-maintainer --help
Determine the correct verb and flag order for setting a per-agent model pin (not the global default). Report the exact syntax in your findings before using it.
Step 2 — Assess global-default damage (read-only).
Run openclaw models status --plain (no --agent flag) to capture the current global default.
Inspect /Users/openclaw/.openclaw/openclaw.json and /Users/openclaw/.openclaw/openclaw.json.bak to determine what the global default was before Braden's three set commands. The backup only reflects the state before the last command, so you may need to reason from git history, diff the backup against the live file, or check whether there's an earlier rolling backup. If the original default is unrecoverable, say so explicitly.
Report: (a) current global default, (b) pre-sequence global default if recoverable, (c) whether the current default is a sensible value to leave in place.
Step 3 — Verify per-agent pins are still intact (read-only).
Confirm by running openclaw models --agent <name> status --plain for all five agents that the per-agent pins are still:
main → openai-codex/gpt-5.4
worker → openai-codex/gpt-5.3-codex
ops-maintainer → openai-codex/gpt-5.4-mini
research-intelligence → openai-codex/gpt-5.4-mini
systems-architect → openai-codex/gpt-5.4-mini
Also re-read /Users/openclaw/.openclaw/openclaw.json directly to confirm agents.list[*].model still holds explicit per-agent values for all five. If anything was clobbered, stop and report — do not proceed to Step 5.
Step 4 — Stop and report before making changes.
Post a Thread entry into THR-25 (or the follow-on entry Dorian posted for the pin-verification task, whichever is threaded to THR-25) with:
Correct per-agent pin syntax discovered in Step 1.
Global default assessment from Step 2.
Per-agent pin integrity from Step 3.
Proposed exact commands for Step 5.
Any concerns.
Then Telegram Braden per THR-20 and wait for explicit approval before proceeding to Step 5.
Step 5 — ONLY after Braden approves: apply the three pin changes.
Using the correct syntax from Step 1, change:
ops-maintainer: openai-codex/gpt-5.4-mini → openai/gpt-5-mini
research-intelligence: openai-codex/gpt-5.4-mini → openai-codex/gpt-5.4
systems-architect: openai-codex/gpt-5.4-mini → openai-codex/gpt-5.4
After each change, verify with openclaw models --agent <name> status --plain before moving to the next.
If Braden also approves a global-default restoration in Step 4, do that separately and verify.
Step 6 — Final state report.
Post a final THR-25 entry with the post-change CLI output for all five agents plus the global default. This is the ground truth I'll use to run the documentation reconciliation (A–F in Claude's earlier plan).
Hard constraints:
Steps 1–3 are read-only. No writes.
Step 5 only proceeds after Braden explicit approval in Step 4.
Do NOT use any set command that reports "Default model:" unless you are deliberately setting the global default.If a per-agent command reports "Default model:", abort immediately — that's the wrong verb.
Do NOT modify openclaw.json by hand as a workaround unless the CLI has no per-agent pin verb at all, and even then only after reporting and getting approval.
Do NOT delete or overwrite the existing .bak file.
Every step reported into THR-25 before the next step. No silent work.
When done, Telegram Braden with a one-line summary and the current five-agent pin state.
assistant: I’m doing Steps 1–3 read-only first, then I’ll post the findings, exact proposed commands, and wait for approval before any pin changes.
assistant: THR-25 pre-change verification is posted.

Headline:
- Steps 1–3 complete, read-only.
- Per-agent pins are still intact.
- Current `openclaw models` help exposes only a global default setter; no documented safe per-agent set verb was found.
- Global default is currently `openai-codex/gpt-5.4`; original pre-sequence default is not recoverable from `.bak` alone.
- Step 5 is blocked pending your approval and a safe write path.
assistant: [[reply_to_current]] Complete.

Steps 1–3 are done, read-only, and the report is posted.

Key result:
- The three specialist per-agent pins are still intact.
- The currently exposed `openclaw models` help only documents a global default setter, not a safe per-agent setter.
- Current global default is `openai-codex/gpt-5.4`.
- The original pre-sequence global default is not recoverable from `.bak` alone.
- I sent the THR-20-required Telegram update and am stopped, waiting for your explicit approval before any write step.
user: Conversation info (untrusted metadata):
```json
{
  "message_id": "4713",
  "sender_id": "8032472383",
  "sender": "Braden McLeish",
  "timestamp": "Wed 2026-04-08 15:06 PDT"
}
```

Sender (untrusted metadata):
```json
{
  "label": "Braden McLeish (8032472383)",
  "id": "8032472383",
  "name": "Braden McLeish"
}
```

Dorian — ops-maintainer pin change via direct config edit
Context: THR-25 Step 4 found no CLI verb for per-agent pin changes. The only write path is editing /Users/openclaw/.openclaw/openclaw.json directly. Braden has approved a single-agent change: ops-maintainer: openai-codex/gpt-5.4-mini → openai/gpt-5-mini. Research-intelligence and systems-architect are deferred. Global default is not being restored.
Step A — Fresh backup (write, but safe).
Before any edit, copy the current config to a dated backup that will not be overwritten by any CLI set command:
cp /Users/openclaw/.openclaw/openclaw.json /Users/openclaw/.openclaw/openclaw.json.pre-opsmaint-pin-20260408
sha256sum /Users/openclaw/.openclaw/openclaw.json
sha256sum /Users/openclaw/.openclaw/openclaw.json.pre-opsmaint-pin-20260408
Confirm both hashes match. Report the hash.
Step B — Identify the exact edit target (read-only).
Read /Users/openclaw/.openclaw/openclaw.json, locate the agents.list array, find the entry where name or equivalent key is ops-maintainer, and identify the exact JSON path and current value of its model field. Report the path and current value before editing.
Step C — Propose the exact edit and wait for approval.
Post into THR-25:

The JSON path to the field.
Current value.
Proposed new value: openai/gpt-5-mini.
The exact edit operation you intend to perform (e.g. which tool, search string, replacement string).
Whether you intend to touch any other field. If yes, abort — this edit is scoped to exactly one field.

Then stop and wait for Braden's explicit approval before Step D. Telegram per THR-20.
Step D — Apply the edit. Only after approval.

Apply the single-field change. No other modifications.
Immediately run sha256sum on the new file and report.
Run openclaw models --agent ops-maintainer status --plain. Expected output: openai/gpt-5-mini.
Run openclaw models --agent main status --plain, openclaw models --agent worker status --plain, openclaw models --agent research-intelligence status --plain, openclaw models --agent systems-architect status --plain. Expected: all unchanged from pre-edit ground truth.
Run openclaw agents list --json and confirm no unexpected structural changes to the config.

Step E — Post-change report.
Post final state into THR-25: new sha256, ops-maintainer pin confirmed, all other four pins confirmed unchanged, global default unchanged. Telegram Braden the one-line summary.
Hard constraints:

Exactly one field changes: ops-maintainer.model.
Do NOT touch research-intelligence or systems-architect. Explicitly deferred.
Do NOT touch the global default.
Do NOT delete or overwrite any existing .bak or .pre-* backup.
Do NOT use any openclaw models set command — the verb is wrong.
If the post-edit verification shows ANY unexpected change to ANY field, restore from /Users/openclaw/.openclaw/openclaw.json.pre-opsmaint-pin-20260408 and report.
Report into THR-25 before each step transition. No silent work.
assistant: I’ll do Steps A–C now: make the fresh backup, verify hashes, locate the exact JSON path, post the proposed single-field edit into THR-25, send the THR-20 Telegram update, and then stop for your approval before applying it.
assistant: THR-25 Step A–C is posted.

Ready state:
- Fresh backup created: `/Users/openclaw/.openclaw/openclaw.json.pre-opsmaint-pin-20260408`
- Matching SHA-256: `4ea81d49cc8d924006635d95f26aea6f6c9ab4ff973404273e64b0fcb5aa0281`
- Exact target: `agents.list[2].model`
- Current value: `openai-codex/gpt-5.4-mini`
- Proposed new value: `openai/gpt-5-mini`
- Scope: exactly one field only

Waiting for your explicit approval before Step D.
assistant: [[reply_to_current]] Step A–C is complete and posted.

State before edit:
- Fresh backup created: `/Users/openclaw/.openclaw/openclaw.json.pre-opsmaint-pin-20260408`
- Matching SHA-256 for live + fresh backup: `4ea81d49cc8d924006635d95f26aea6f6c9ab4ff973404273e64b0fcb5aa0281`
- Exact target field: `agents.list[2].model`
- Current value: `openai-codex/gpt-5.4-mini`
- Proposed new value: `openai/gpt-5-mini`

I sent the THR-20 Telegram update and I’m stopped, waiting for your explicit approval before Step D.
assistant: Session agent:main:main (main) at 46.9% — summarize + prep rollover.
user: Conversation info (untrusted metadata):
```json
{
  "message_id": "4720",
  "reply_to_id": "4719",
  "sender_id": "8032472383",
  "sender": "Braden McLeish",
  "timestamp": "Wed 2026-04-08 18:05 PDT",
  "has_reply_context": true
}
```

Sender (untrusted metadata):
```json
{
  "label": "Braden McLeish (8032472383)",
  "id": "8032472383",
  "name": "Braden McLeish"
}
```

Replied message (untrusted, for context):
```json
{
  "sender_label": "Dorian",
  "body": "Rollover prep complete. Resetting session."
}
```

Did this happen?
assistant: [[reply_to_current]] No.

This session has not been reset yet. I’m still here in the same session, and the last actual state was: Step A–C for the `ops-maintainer` pin change completed, posted to THR-25, Telegram update sent, and I was waiting for your approval before Step D.
assistant: Rollover prep complete. Resetting session.
user: Sender (untrusted metadata):
```json
{
  "label": "openclaw-control-ui",
  "id": "openclaw-control-ui"
}
```

[Wed 2026-04-08 19:28 PDT] rollover the session, create the handoff, save the data, reset
assistant: [[reply_to_current]] Rollover prep complete. Resetting session.