record_id: 2cff8b3e-f83d-8140-974e-c08cbe741a5c
created_time: 2025-12-20T20:08:00.000Z
title: 12-17 Coordination Meeting: Construction, Renovation, and Waterproofing
source_url: /

[TRANSCRIPTION]
Speaker 1 00:00:02
Okay, I forgot this too. I knew when I set it down. It's like, you're gonna forget this. No, actually I don't. I remember my bag, so if it's next to my bag or on it, that's why.
Speaker 2 00:00:41
Thank you.
Speaker 1 00:01:25
Yeah, I think. It's a key or II I oh, yeah. What's the difference?
Speaker 1 00:01:57
No, I he he is Right, but I thought I he was there, right? I could say I eat. Oh, yeah. Yeah. What's the difference. 
Speaker 3 00:02:20
Oh.
Speaker 1 00:02:30
When you go back that way. So like the bins and stuff, like can we move these? Let's hold off on any of that because I don't have a spot for that. Let me, when my contact arrives, let me ask her how's that. So the bins and stuff, we can kind of like, we can move these and we can move these so.
Speaker 1 00:03:01
that they properly fit in here, right? But I want to say yes, but I want to make sure that she's good with it and she'll probably be here in the next hour. Did we bring all the bins? Are any bins left over in PV? Do you know if we brought the epoxy?
Speaker 1 00:03:43
Huh? That's here? Why don't you lift? Okay, this is a no noise until eight o'clock job. Okay.
Speaker 1 00:04:27
I found the scooper.
Speaker 2 00:09:53
Thank you.
Speaker 1 00:13:14
Oh, it's right there. Can you grab me the box, please? It's like I need my notebook, and I told them to put it in the truck. No, no, I'm glad you didn't, because this just helped me. But honestly, oh, look at this. I don't need this. I set this down yesterday, and I go, you're going to forget it. And they're like, no, you won't. So what I'm saying for you is, you know,
Speaker 1 00:13:48
remember, it's like expect things to go wrong and make things, you know, create rules to keep them from going wrong.
Speaker 3 00:14:01
I remember once I had said that to somebody, because for a while, it was expect the worst but hope for the best type of thing. But I remember when I said that, I can't remember what it was that told me, but like when I remember I was saying that to somebody, they were just like, dude, that's such like a negative weight, look at you.
Speaker 1 00:14:16
How are we going to, what's your plan now? Where are you going to put that? Probably over here, a little bit of pressure wash will just slide over here. I don't want it to, I want to protect the grass, I don't want it to be like heavy. So I'm almost thinking like, maybe we just put the, maybe, no, maybe we put it down in here, yeah. We've got enough hose to get to it.
Speaker 3 00:14:48
Yeah, we do, yeah, we got it, we got it.
Speaker 1 00:14:53
Okay, don't try to do that. No, no, yeah, I'm going to look at it.
Speaker 1 00:15:24
um just you know right here and then look at me just watching you do it for him um tomorrow.
Speaker 1 00:16:01
for you guys i think i'm gonna have you guys meet me rocky okay and then we're gonna, grab everything from rocky point but most of it in me some of it into you okay, And the reason why is because we need to, the cleaning that we did at Tennyson on 8th Street is still not up to par in the pool.
Speaker 1 00:16:37
It needs to be pressure washed the whole time. So we're going to pressure wash that, and then we're going to, while one guy is working, the other guy can, you know, it shouldn't take too long, but we can continue on with pipe penetration.
Speaker 4 00:16:56
Okay.
Speaker 1 00:16:57
Okay, so we'll make a day of it. And then they're going to shock free Friday. So that's why we want to make it all clean, right? We want no surfaces that it can't bond to. Okay. I'm not sure that, I'll go there with you. Okay. So I want the large majority of the stuff to go with me. the other stuff that you'll need at 8th street to go with you if you're okay with that yeah for sure.
Speaker 1 00:17:27
that way i can take this stuff over here and have it ready for us yeah i'll make sure my truck is emptied out at the end of the day um or it could be if you you know yours isn't yeah no but i'm.
Speaker 3 00:17:40
gonna i'm gonna try to figure it out today just because yeah i mean it's yeah just a whole bunch.
Speaker 1 00:17:44
of just yeah random tools and stuff okay and for the record i'm not trying to use you guys as mules or anything but it's a it's a quick little because the thing happened so fast i went i'm not prepared no i mean i don't mind that honestly like it's just you know and i appreciate that but the last thing i want is for one of you to feel take an advantage so i'm gonna i'd rather use you guys.
Speaker 1 00:18:19
in the case of, you know, in a pinch, you know, here and there, right, because that's how I kind of view myself, like, hey, I'm always here to help, but don't ask me every day, you know what I mean, like, it's, it's one of those things, like, you've never taken advantage, it's always, yeah, I mean, like, I don't know, like I said, like, you could, I mean, honestly, like, I have no problem, like, hauling around tools or anything like that, picking up materials, I mean, like I said, I used to do that all the time, so, you know, that's my personal truck, so, like, that's how I roll, right, so, you know, so that's, that's.
Speaker 1 00:18:51
my plan, but before, if I don't say anything now, so, we'll meet at Rocky Point at 7, we can't even get into 8th Street till 8, till 7.30, so, I want to, you know, get everything done there, I don't think it will, like, it takes 20 minutes just to get there, but I think we're going to spend an hour or two just gathering, I want to, I want to leave the canopies over there, I think, but, i want the rest of it i mean see like look how mobile we are i'm so proud that this worked out.
Speaker 1 00:19:30
well my goal was how do i make sure that i mean they let me up and out but i'd like to pull up with the trailer one day get all the one right um and not be like the last time we did it it was, you know up there in montecito right or was that no i we did it in montecito but i think i'm thinking about alpine yeah it was like a moving vent so oh we get this pump here yeah.
Speaker 1 00:23:43
So, Dan, for today, I think you can cut here.
Speaker 2 00:24:01
That's better. So, you and Rene, cut this here.
Speaker 1 00:24:25
And them... Maybe one to two thousand. Pressure wash, right? So, but just the gaps aren't bad. Right. That's good, that's good. There's no sprayer, right?
Speaker 1 00:24:57
Sprayer? Yeah? The clothes? The clothes. 
Speaker 5 00:25:06
Oh, I'm not sure. So, the... The boots? Oh, yeah.
Speaker 1 00:25:23
Okay, so then... So, because the rods need to be cleaned, right? AquaBlock. 
Speaker 4 00:25:36
You're getting this? I'm just saying, yeah, AquaBlock and then... Hmm. 
Speaker 1 00:25:44
Yeah, so when you pressure wash kill the rebar. Just hit it heavy. Yeah, if it if it all disintegrates then great, Yeah, right because that's what we want right just take it away if it's weak. So take it all away So he's gonna cut on this side. You're gonna go on that side at some point in time you switch.
Speaker 4 00:26:09
Okay, so it's okay to apply over there after we pressure wash when he's over here cutting, at that end of the pole.
Speaker 1 00:26:24
Hey, hey, you know. But a lot. So I'm thinking they're cutting, and you guys are prepping over there, right. 
Speaker 4 00:27:13
And then vice versa. Prepping the pipes for membrane.
Speaker 1 00:27:20
And if you have to pressure wash it real quick, you know, I think even if you pressure wash it, you know, maybe you guys do two at a time. You're not worried about, like, dust.
Speaker 4 00:27:33
Okay. You know? Yeah. Right.
Speaker 1 00:27:41
So, we don't worry about aqua block. We're going to do aqua block today. We're going to re-look at that detail, and then they can...
Speaker 3 00:28:14
Do you have electricity there, too. 
Speaker 4 00:28:29
Yeah, we're going to put in more cords. I don't think we do. I have... No, we've got something. We've got this one.
Speaker 1 00:29:23
so we can only put mortar bed 2000 on the ones that aren't getting um that aren't getting that, that aren't getting the rebar details the ones that are getting a rebar detail. I would honestly say all of them leave.
Speaker 4 00:29:49
Get rebar detail? Yeah, because you can see the rebar.
Speaker 1 00:30:03
Get these guys out. Okay. If you have to cut this off, that's fine. They're not showing any purpose? Well, not anymore.
Speaker 4 00:30:12
They're in the way right now.
Speaker 1 00:30:13
So the purpose of them is to keep them in place when they're doing shock. It's not a gun.
Speaker 4 00:30:23
Oh, because the pressure of the shock. Right.
Speaker 1 00:30:25
So we can actually chip these out, too. But they actually go. I'll bet you they go back to the rebar. That's what they're probably tied to. That's what they're tied to. So.
Speaker 4 00:30:41
And did you ever. figure out what to do with this one or we're going to seal this one up around here or we're going to.
Speaker 1 00:30:47
this one i think at a minimum we got to take this out so right so we should come behind this this old crap here yeah no i think it's a he was saying it's a you know it's like tollis they have this calcium they used to attack it with this like calcium based field so i would chip a little bit more and we can do that before we pressure wash obviously the first thing to start.
Speaker 1 00:31:24
off with no we're going to cut away the tie wire yeah whatever yeah whatever download um and then. I think we've got two broken pipes. This one is the one in the basin, the one in the basin. I think that one coming out, we'll get it.
Speaker 4 00:32:05
This right here is not ours. It's yours left over from the demo company. One of their own, so. Our stuff stays dry. I knew that it was going to rain just before we got it. I thought you guys had covered it. It's a pump pump.
Speaker 4 00:32:38
But I know that before Christmas and during Christmas and the day after.
Speaker 1 00:32:46
So, just saying, so again, we've got a, I didn't think about this when I told you to put it there, but we've got a room downstairs. Okay. So if you go downstairs, if you go down the stairs and turn left, there's a door immediately to your left. Here, I would say, find your low point.
Speaker 1 00:33:17
Here. 
Speaker 4 00:33:18
Yeah. It's over on this side here that more water accumulates.
Speaker 1 00:33:26
And I think we can pop a quick little hole in there. I'm just trying to get a low point, so that way, the lowest point, so I can put a pump there.
Speaker 1 00:34:14
Yeah, because if not, we'll always have this little deal that we're walking through. Don't do it for that. I wonder if that pump even works anymore, because we left it in the water. Well, it's all covered with water.
Speaker 2 00:34:41
...fine mortar and stuff like that, something like that.
Speaker 1 00:35:15
I'm only proceeding in the center also, so that way... The pressure washer? Yeah, or wherever we're gonna... Does the hose, does the hose, the hose isn't, so... Yeah, the one that's running down the way, is it? If we put that pressure washer on that side, would it... Meaning did you get it with the hose? You're gonna have to go through hoses either way, right? Yeah, just this one itself reaches all the way over here.
Speaker 3 00:35:49
Hey Felix, you connected the hose? This was the long one? It's connected, this is not on.
Speaker 1 00:35:58
Oh, it must be a different hose then. So, did we bring that distributor? The mantel? Or is it gone already? No, that's still over.
Speaker 4 00:36:12
Alright. No, I think it's better after. What do I want it to chip? It's like we're gonna chip out of it? No, no.
Speaker 1 00:36:36
Right.
Speaker 3 00:36:36
Just enough to where the water is going to be right there. I want a low point, yeah. It looks like this one right here is kind of ready to start. I could just, like, would that be all right right there. 
Speaker 1 00:36:48
Wherever the low point is. So if you want to suck out the water first and see where the water dries, that's fine too.
Speaker 4 00:36:56
For my pastor's church.
Speaker 1 00:36:60
I'll just say because it's like right here. Right now you can't tell, right, because it's all. I'll get the vacuum. So if you suck out, like, the high point, if you will, you'll consider it a high point. Yeah, yeah, like a little. You suck out the high point, suck out the high point, then you'll see it. Okay. Okay, and then we'll attack that.
Speaker 1 00:37:35
this one we're going to do completely different so i'm not going to we're not going to do the entire pool with membrane c or anything like that we're going to do that last okay so this guy's going to get this whole thing is going to get tile this this from here it's going to wrap the center of the tile here we're not even going to water it until the very end.
Speaker 1 00:38:51
Oh, yeah, Hydro-Ban, so it's two, okay, Hydro-Ban and Hydro-Ban cement tissues, so the Hydro-Ban cement tissues is with cement, right, the Hydro-Ban is not good for the residents, but they use it.
Speaker 3 00:39:31
Shack, if we're, uh, they're letting us.
Speaker 5 00:39:49
There's a tire with cement. It's a lot of work.
Speaker 3 00:40:01
No, look.
Speaker 5 00:40:36
Is that the silicone. 
Speaker 6 00:40:40
It's outside.
Speaker 1 00:40:47
Yes, but this is tile, you see right here, tile, like this, okay, let me, let me send it to Corey, because I said, hey, I have a plan.
Speaker 1 00:42:50
We don't want to chip it all out. We'll just give it a detail there.
Speaker 3 00:42:58
Cut it.
Speaker 1 00:43:00
Yeah, so we'll cut it back to the cement, right, and then we can do that. We'll do our aqua block and epoxy. Yeah, yeah. Oh, wow.
Speaker 3 00:43:20
Oh, this one? 200? 50. You want 50? I'll give you 20.
Speaker 6 00:43:32
Put it together. There's another extension there. Here's this one. We're going to need another one for the backing. If we cut it, it won't be too much.
Speaker 3 00:44:38
Are you ready to go?
Speaker 3 00:46:12
So what's the plan, Manny? What's the plan? What are we going to do? We're going to search for the answer. Okay. Oh yeah, we're going to search for the answer. Okay. There's one over there, that one doesn't work? That works, it has two connections. The other one that's over here on this side though. There's another one right here on the floor. 
Speaker 2 00:46:44
Over in the plant.
Speaker 3 00:47:31
renee right here on this wall right on the couch it's a little bit like right behind the couch.
Speaker 1 00:47:37
you'll see another little family setting that one see if that one uh so la la. la piscina tile tile okay master key tile and door all right what else.
Speaker 1 00:48:31
The membrane, you know, here, that's when they, you know, touch this thing and take it.
Speaker 1 00:49:59
We need to test that, because if you look at it, the mortar and junk all dried in there, so if you want to take it over there. So, when there is an elevation, you can, you know, put in the strips, right. 
Speaker 5 00:50:35
We're just going to make a hole right here, so you don't need to go for it.
Speaker 1 00:50:40
Okay. And I'll use the fourth one, I'll put it back in. Well, I mean, yeah. So get...
Speaker 5 00:50:48
Yeah.
Speaker 1 00:51:35
So, what is the control line, right, what is the line of control, that's right.
Speaker 5 00:51:46
Can you pass me the track flag? Yes, but what is the high point, right? Where is the water going to fall, right. 
Speaker 1 00:52:01
The water is going to fall, yes.
Speaker 5 00:52:03
No, so...
Speaker 1 00:52:06
I can double it with my boot, right? Yes. Where is the water going to fall, right? But, so, you need a line, right? What is the measurement of the wall? You need five degrees, right? That's easy, right? So, it's the high point, right? The high point plus 5 octaves, right?
Speaker 1 00:52:46
The high point plus 5 octaves is the size of the wall, you understand? So, you need a... So, okay. So, when the high point is here, more or less, right? Okay, okay, right. 
Speaker 5 00:53:22
Is that going to be the guide. 
Speaker 1 00:53:25
Yes. So, this is the guide. So, let's check. The measurement is the same, we can use the corner, and I want a storyboard too.
Speaker 1 00:54:05
I want a wood, right? Maybe here, right? Brandon, can you hold that real quick? Copy, no? Copy?
Speaker 1 00:54:36
Yeah, it doesn't matter. It's just I want to know how many feet it is 14. What is that? Two feet more or less? Yeah, 23 inches. Okay, so. right so so.
Speaker 1 00:55:36
Elevation. Right. 
Speaker 6 00:55:41
.
Speaker 1 00:56:36
Puedo marcar aqui, no necesitas madera, que piensas, porque cuando es completo, tu puedes poner la laser anywhere here, right, so cuando la laser es, porque es 10 piezas, right, so tu puedes poner la laser aqui, y aqui es bien, right, para eso, aqui es bien para eso,
Speaker 1 00:57:28
pero, cuando necesitas tu, you know. So, you can, yeah, no, that's it, so, one way there, put the laser here, and one way there, so, maybe put it here, 10 feet, 20 feet, huh, yeah.
Speaker 2 00:58:46
No, but it's okay. No? Okay.
Speaker 5 00:59:25
Put it back. Put it back.
Speaker 5 01:00:36
You can talk, there's a reason to talk, cut everything. No, no, I don't want to cut everything.
Speaker 2 01:01:27
Michel, here.
Speaker 1 01:01:36
So, I need to know the size of the plant, so I need to know the size of the plant.
Speaker 1 01:02:31
What is the glue, right? Yeah. So, maybe detail. A little bit. Aria? Yeah. Also keep in mind, though, too, like... Okay. We're also waiting for... Okay. When we know... Delivery side? Yeah. How are you? Yeah. We can make a plan.
Speaker 2 01:02:59
Do you want to see my wife. 
Speaker 3 01:03:14
Hey! What's up? Do you want to see my wife? Hey! What's up? All right.
Speaker 2 01:04:18
Thank you.
Speaker 3 01:05:27
what do we find um it puddles up more right here towards the center um but it looks it looks like like that area and this area are kind of the same i have this right here that kind of looks like it's.
Speaker 1 01:05:40
a little bit more engaged did you vacuum it like i said they're coming in slowly yeah and.
Speaker 2 01:05:50
everything pulled more right here in the middle on the outside hey uh brandon yeah all right so.
Speaker 3 01:06:24
uh what do you think is a good area uh uh well when i vacuumed the i was vacuuming the edges of the water to see where it would pull more it's not the same in the middle right i feel like this right here is kind of like a little bit higher so kind of like separate it too right yeah i was thinking about maybe doing it just right there in the center of that so that way you know in the way.
Speaker 1 01:06:44
of us working right here center would be good yeah um okay so i thought i could you be okay with doing it like right here since this is already low you can put something here even thinking is we might be able to um take that chaser and just run a line from there to there maybe um and i'm not looking for you know i don't need a huge remember we're over living space here right so yeah i'm just looking for it to be lower than everything.
Speaker 1 01:07:18
It doesn't have to be that pump. Did we try that pump yet. 
Speaker 3 01:07:21
Yeah, it works. Is there a different pump? Or do we have the other ones here. 
Speaker 1 01:07:28
I can bring the other one. Like the one in the bucket? That one? Yeah, I mean, I can bring that one just there.
Speaker 3 01:07:41
So, I don't remember. I mean, yeah, those ones actually, this one's way wider than those ones. Yeah, yeah.
Speaker 1 01:07:48
So maybe not so wide? We can wait until we bring that tomorrow. Yeah, whatever Brandon wants.
Speaker 6 01:08:16
Oh, you don't have to wash it.
Speaker 5 01:08:17
You don't have to.
Speaker 1 01:09:56
You can go at an angle, but you're cutting this, right. 
Speaker 6 01:10:10
Oh, you're saying to cut this part, yes, to cut it.
Speaker 1 01:10:12
Right, so, right. 
Speaker 2 01:10:16
Yes, yes, that's it. So, right? To cut all these parts. 
Speaker 5 01:10:28
Yes, to cut them all.
Speaker 1 01:10:36
Okay. What do you mean? I don't know.
Speaker 5 01:10:41
I don't think so.
Speaker 1 01:10:42
I don't know.
Speaker 5 01:10:43
I think it's just to cut. First, like this? I cut it here, and then I cut it. Right? I cut it here, and then I hit it, and the part falls out.
Speaker 6 01:11:08
You need to cut it here. I'm going to cut the tweezers, cut the tweezers, I'm going to stick it here, and then the scythe comes out. Got it? So... I'm going to cut the tweezers down here first. The tweezers, this part, and I'm going to stick it to the scythe and it falls. Okay. It's my job.
Speaker 5 01:11:28
Can you try that? So... I just cut the tweezers here first. Right. Because the tweezers are stuck to the scythe. So... I cut it here, I stick it, and it falls. I stick it, and it falls.
Speaker 6 01:11:41
But it's a sample, right? Yes, because it's not a sample. The scythe is not stuck, the scythe is not stuck with this. Right, right, alright. So... But it can be done like this. A sample? I'm going to do it. Yes. Okay.
Speaker 4 01:12:14
If we see rust, does that mean there's rebar in there? If we see rust, we should attack it. With, uh, what's this pipe here? I don't really see... Pressure washer, does it rechip it back more. 
Speaker 1 01:12:34
Yeah, I might chip it back a little bit more and see where it's coming from. You know. 
Speaker 2 01:12:39
I mean, once we aqua block it too, it'll get, you know...
Speaker 4 01:12:60
What about with this being the rebar in there? Or because the pipe is broken, would that mean...
Speaker 1 01:13:07
I think we should handle all the rebar as if it's, right? So whatever rebar we see, I think we should...
Speaker 4 01:13:13
Dress wash it, and then are we going to epoxy it with silica sand. 
Speaker 1 01:13:18
Yeah, but I want to do, I want to do aqua block first. I've got to look up the detail.
Speaker 4 01:13:25
Okay.
Speaker 1 01:13:26
Tell me when you're ready. I just want to, let me finish this, and then I can look up the detail for that.
Speaker 2 01:13:49
Okay, do one more cut.
Speaker 1 01:13:59
See if, so, yeah, yeah, what was it, you know, one cut. 
Speaker 5 01:14:07
Is that that? Yeah. Good.
Speaker 2 01:14:16
let me try it right here.
Speaker 3 01:17:33
Do I have my grinder?
Speaker 3 01:18:44
Brandon, we should be able to do the ones on the other side too, right? Like that, man. Oh, right, right. Let me do it. What's up? What? Hey, Manny. Manny. No, no, no. No, that's not a question. Seriously. I'm going home now. No, no, no. Come on.
Speaker 3 01:19:52
Are you using this? Yes, I'm using this. The other blade, I have the other one. It's sharper than this one. This one is kind of dory. Oh, I forgot.
Speaker 5 01:20:10
I know, but I can do it myself. Yes? There are many. This one already has time for this.
Speaker 3 01:20:23
Yeah. I mean, it's going to cut still, but, you know, it's just the other one is, yeah, but, it's thinner, but that's the thing. This one is better than this one. Why. 
Speaker 5 01:20:50
You can see it. This one has a lot of... It has more of a blade.
Speaker 3 01:21:06
Do you need the...
Speaker 1 01:21:15
What is this boy? Brandon's...
Speaker 5 01:21:22
Brandon's belt.
Speaker 6 01:21:35
You never pay. You never pay? Yeah.
Speaker 5 01:21:50
Oh, bye-bye, Oh, the brushless. 
Speaker 3 01:22:08
Oh, he needs the brushes for the... You know what the brushes are for the... They're like these, like... Oh, my phone's just getting... Oh, but that's not carbon. It's, um... Yeah, so it's like these little, magnetic things that are kind of they're like on a spring, and they when you turn it on, they're supposed to extend and make contact with the whatever tool you're using.
Speaker 3 01:22:39
This is...
Speaker 1 01:22:42
Yeah, exactly. Because I don't see it, you know, so I don't remember it. What is it? It's a present.
Speaker 3 01:24:48
Thank you.
Speaker 1 01:26:27
A color difference or is his message, is there a reason they didn't overlap. 
Speaker 4 01:26:40
other than not knowing or not i left two inches around the um the pipes um at the top you know so like we installed yeah just a membrane to the corner i didn't go over i just made sure i had two coats on it there's not a reason god like the rules are gonna stay he's yeah totally on.
Speaker 1 01:27:16
me right now so um but i mean there's gotta be there's always an overlap right there's always another zone we've gotta make sure we gotta think about the job as. how does this right don't be quick to dive in right here so how's that going to work out what.
Speaker 1 01:27:49
needs to happen because what we're looking for is you know this was like yeah we can break brandon off you know right now yeah and and so you know this is i'm not trying to be it no no we broke them off to do this and i guess this probably broke them up right there's got to be you and.
Speaker 1 01:28:23
i got to figure out a way to keep you you know i don't mind you know working with you differently than when well right because you are different. I feel like right now it's, that's not fair to say, I'm not going to say, we just can't, this is, you know, basically, exactly, now I've got to go figure out how to fix that, and we'll fix it when we do it.
Speaker 2 01:29:15
How much does that overlap. 
Speaker 4 01:29:36
The width of the brush is probably an inch.
Speaker 1 01:29:46
He's naturally going to think. Right, right. Is there anywhere else that we want to hit that with a pressure washer.
Speaker 4 01:30:21
or clean it with a wire brush first. 
Speaker 1 01:30:25
Once you get the water on it, you're not going to know where it starts, right? I don't think it's far enough back that I don't think we need to worry about. exposing it because it's three inches back right and so I think we can get the water on it.
Speaker 3 01:31:60
Should I get like a wire brush and start. 
Speaker 1 01:33:43
Remember, if it's three inches back, we're just going to clean it. I think like this guy, we should see what's going on here.
Speaker 3 01:34:06
Okay, sir. Ready. 
Speaker 1 01:34:07
Suppose I want to open it? Okay. Remember, in the worst case scenario, we have to fill all the holes.
Speaker 3 01:34:15
Yeah.
Speaker 1 01:34:16
So we have to be able to get to it.
Speaker 3 01:34:20
um so then like wait you're actually you know this one actually no that one stops right there so, but this rebar right here it's all like like you know rusted and whatnot like is is that something that we're gonna probably just want to remove entirely because.
Speaker 1 01:34:36
like it's like yeah like falling apart so we'll cut that so but my guess is with the pressure washer the pressure washer will take it off but yeah if you want to cut that real quick i don't care i think it's going to come off super super easy yeah i'll probably just hit it with a hammer yeah but yeah something like that i think cut it you know maybe use the dremel wheel.
Speaker 4 01:35:22
You use your Dremel on that, Alex? The rebar? Yeah, I have a metal wheel. Yeah, I did that. I'm not really worried about cleaning the rebar too much.
Speaker 2 01:36:54
A good way to mess your tools up is to use channel locks.
Speaker 3 01:37:21
Well, I don't, I don't, I know not to like over-tine it, but it's...
Speaker 1 01:37:26
No, I'm just saying each time you put these up against this, it's scratching them. So you're going to end up, you use that wrench. Yeah, yeah, okay, I see what you're saying. So... I got you. Eventually you're going to touch it and it's spicy and everything. Right, right. When we installed the membrane C the first time, did we use a mill gauge on the whole thing. 
Speaker 3 01:37:55
For over there? Yeah.
Speaker 1 01:37:57
Yeah, yeah.
Speaker 3 01:37:59
Yeah, it was, if anything, it was probably like way more than we needed.
Speaker 1 01:38:05
We don't want way more. We want 30. That's the issue. It's making me wonder. Like, oh, it's too much? It needs to be 30, not.
Speaker 3 01:38:17
Yeah, for the first, well, I mean, so, Brandon, when we checked it, when we did the second coat, or the first coat, when we checked it, it was at 30, right? And then the second coat.
Speaker 1 01:38:27
Both coats were done at 30? On both days? Did we check both days. 
Speaker 4 01:38:33
Yeah. Yeah, I checked, especially on the first one. It was a little bit heavier than 30, the first coat. And the second coat, I just applied over the first one. I know it didn't go. Did we use the second coat both times? Was it dry both times? The first one was dry. Notice we had, we had 30, at least 30. I want, but I don't, I want 30. 
Speaker 1 01:39:02
right? That's, that's our goal. We don't want 40, right? It was there. When you say 30, when you, put it on. The teeth, yeah. The bottom of the teeth? The teeth. The bottom or? The inside of the teeth. You got the teeth that went in the teeth. So, yeah, so if I'm, let's imagine this is, right,
Speaker 1 01:39:33
if it's up here, then it's not, then it's too much, right? So this is the 30 tooth, right? Okay. Right, so you got, this one's 25, this one's 20. Right.
Speaker 4 01:39:51
Where would you say the membrane is? When I stick it in the membrane, it goes up to the bottom of the footprint.
Speaker 1 01:40:02
Hey, um, Rene, can I have a nail gauge, please. 
Speaker 3 01:40:09
Is that the bucket over there, Rene, that should be in there. 
Speaker 4 01:40:12
The 30. It got right up into the top of the notch.
Speaker 2 01:40:33
So, here? Yes.
Speaker 4 01:40:55
I thought there were differences here.
Speaker 1 01:41:01
No, look at it. All of these, you see how it doesn't touch the... Yeah, all of these are the same.
Speaker 4 01:41:25
Either the mix that we're using to mix the membrane C is possibly too thick as we're putting it on, because we're spraying it on, that's what we're doing. And it seems like the second coat is a little bit thicker, it sticks to the... it sticks to what's dry and it kind of like dries the second coat you just applied to a little bit faster and it spread and it goes on it seems like it's kind of thick well then we need to adjust it.
Speaker 1 01:42:04
so you can put water because we put water in it before right so one of the 30 is a key see. um that's when we need to you can put a little bit of water in there or you can adjust the pressure the less pressure makes it come out more globby more pressure you can also adjust the.
Speaker 1 01:42:39
spray the nozzle what is what is that going to do um. i don't know what the maximum thickness that you want to put it on but i mean.
Speaker 2 01:42:51
at that point we've got that's it that's darn your double where we need to be.
Speaker 4 01:44:05
Using the mill gauge, I thought it was, if it went up, if it set in there deep enough and went past the tooth, it would...
Speaker 1 01:44:14
No, because, I mean, again, it's all the same. Right? So, this is the same as this. This is exactly the square, or rectangle. Right? So, if I measured, and we'll use the big one. I put that at the one inch mark, you're seeing it's about an inch, right? So, that would be 80 mils, right?
Speaker 1 01:44:44
Well, it's at the 80. Right? The same thing, the one inch mark, and the same with the next. That would mean that there would be no difference between 80 and the 35. Okay. 
Speaker 4 01:45:03
I wasn't losing the no-gauge, right. 
Speaker 1 01:45:05
Okay. Um... Did it go on too quick over there, or...? Oh, it's probably what happened.
Speaker 2 01:45:37
I don't mind... Is this dark. 
Speaker 1 01:45:53
Um... I don't expect it's dark. Nicely. Keep on being next, you know, process.
Speaker 2 01:46:16
Take the pressure off.
Speaker 1 01:46:42
Have we checked all that? So remember we talked about opening up that hole? Uh huh. Right? Right there.
Speaker 4 01:46:49
We didn't want to go too far back creating. Move up? We didn't want to have to be like blocking point.
Speaker 1 01:47:05
yeah so let's why don't we start from one side and work our way to the other and make sure that there aren't any holes there aren't any things that we want to do demo on I don't want to start pressure washing stuff unless we're done demoing these three are good right there's no hole exit that leave this guy alone.
Speaker 4 01:47:36
right since we have to fix it even though it's broken so no more to bet two thousand around that no they want to change something then you know it might.
Speaker 1 01:47:48
get broken out or yeah I don't want to I want to do it twice.
Speaker 3 01:47:57
open this one up right mm-hmm okay so that one with open up on the bottom, Okay, just for that hole, right? Or for the hole at the bottom. What do we think about that one? This one here? That one's pretty solid right there. That's just a rebar.
Speaker 4 01:48:21
Can you chip it back a little more. 
Speaker 3 01:48:34
I don't think you need to chip this one back. That's just a rebar. That's just an exposed rebar.
Speaker 1 01:48:46
I'll chip right there. See the little tiny hole there? I think with these, especially if you want to get underneath, you've got to get down and dirty.
Speaker 4 01:48:58
and get past where their pipe penetration is.
Speaker 1 01:49:02
I'd hit this right here.
Speaker 4 01:49:06
First of all, we want to get that behind their pipe. You want to look at this stuff? Yeah, yeah. Whatever pipe penetration they did, we want to get behind that initially first, right. 
Speaker 1 01:49:20
Pretty much. I mean, so you want to come over here? Yeah, show him that.
Speaker 4 01:49:31
Right on the bottom. The hole underneath the pipe. 
Speaker 3 01:49:36
Right, yeah. That could be a cavity because of the way it's shot.
Speaker 4 01:49:40
It usually is when it's underneath like that.
Speaker 3 01:49:46
So pretty much when we come across those things like that, we're just going to open it up and up until we don't see, until we can see like an end to it, right. 
Speaker 1 01:49:54
Yeah. We have to be able to apply, you know, product to it.
Speaker 3 01:49:60
Okay.
Speaker 1 01:50:01
But I mean, like, I don't want it to be like, we don't want. We don't want the possibility of error, right? And so if you're looking at, you know, let's say you're looking at a hole that goes into a cavity behind it, don't get dirty thoughts, okay? But you don't want to go like, oh, I could just, you know, I could just, like, put a grout bag and fill it up in there, because we won't know that we're getting 100%.
Speaker 1 01:50:33
Okay. We have to know that we're covering every bit here.
Speaker 3 01:50:38
Okay. Okay, that makes sense. So, okay, so my question, so, like, let's just say, I think there's a pipe over here that, watch.
Speaker 1 01:50:46
Real quick, before you go there, I just want to make sure that, so, if we're doing that same point here, right, this whole part needs to be opened up to the same thing.
Speaker 3 01:50:56
Yeah, so we can see.
Speaker 1 01:50:57
So if I had a bottle with me. That's probably the perfect example. If we're looking at a bottle, right? Yeah, yeah, the opening. You've got to open that whole bottle up. And that bottle, you would have to go all the way to the end. If you're looking at the bottle sideways, right? So the bottle's this way. If this is your bottle, right, that's your hole, you'd have to open it up to here, right? So we can make sure that we get 254 on this hole.
Speaker 3 01:51:27
Okay, that makes sense.
Speaker 1 01:51:29
Right? And so now all of a sudden, this little tiny hole turns into this, you know. Now, granted, could it be enough for me to get a sponge in there and make sure that I can get everything? Yeah, but I've got to get a whole wall.
Speaker 3 01:51:41
But as long as everything is able to get, okay. So, okay, so like how we were saying, like we don't want to open up like too much. So what would be considered like too much? Like when. 
Speaker 1 01:51:58
did we stop like chasing the chasing it pretty much i don't want well i'd say if you go once we we get to rebar or past rebar okay um that's when you're going hey braden what do you think about this okay you know um hey i know this goes farther what do you want to do here.
Speaker 3 01:52:21
right is that here stop yeah just because i'm also asking also because like when it comes to these pipes over here remember the the cavity that i told you about that opens up so like i mean i can't imagine that's something that you want us to like really like.
Speaker 1 01:52:35
no not without not without talking first yeah all right all right so um you know like this guy if he goes much farther back then i'm going to want to be able to yeah gotcha. Okay so why don't we do that and then once you guys feel like it's ready let.
Speaker 4 01:52:58
me know and I'll take a look. Okay and then the next step after that would be.
Speaker 1 01:53:02
putting 254 rapid set in the back in there if it's opened up. Yeah yeah I mean if it's small it could be mortar bed 2000 right but if it's a large cavity. Is it used to be filled in with the rapid set? One of the two. If it's a mortar bed 2000 or it could be a 254 rapid set.
Speaker 1 01:53:36
Okay. But it depends on how big it is. So like once it gets cut. Like all these little ties that get cut.
Speaker 2 01:53:55
I would just use your, you should grab it. Okay. Um, or... So like, again, just open this up.
Speaker 3 01:54:14
It's going backwards.
Speaker 1 01:54:17
Yeah, I mean, this little hole right here.
Speaker 3 01:54:23
is my biggest concern that there's something going on there. So just open it up, make sure that it's wide enough to where we can get, you know... Okay, okay. Thank you.
Speaker 6 01:54:47
Hasta adentro, hasta adentro. Hasta arriba? Igual, igual que...
Speaker 1 01:54:55
Thank you, yeah.
Speaker 2 01:55:58
This is the other one, 1, 2, 3, but the extension or the, I think Brandon has it, or there's another one for, yeah, there's an extension, but I don't know where, I don't know where to put it, but you said that down there, I don't know.
Speaker 3 01:57:52
Oh.
Speaker 2 01:58:08
Thank you.
Speaker 1 02:02:17
There's a plug in the stairs up there.
Speaker 4 02:03:15
that one's ready that's the end of it right underneath there yeah.
Speaker 2 02:03:18
yeah i removed all of this let's get them all yeah.
Speaker 1 02:04:29
Well, keep chasing that one. You said that we have to expose it. Well, but we don't want to chase it. How far are you going to chase that. 
Speaker 3 02:04:37
Oh, so to my understanding, until I'm able to see, like, the, you know... So if you go all the way to the end, that's okay? Oh, okay. So then I think I misunderstood. Huh? I think I misunderstood that, so... No, that's okay. But I'm exaggerating to make a point. Yeah, yeah, yeah. So pretty much, there are only... So the areas that we're focused on are the areas around the pipes.
Speaker 1 02:05:04
No, no, you're right to see the hole and go, that's an issue, right? The question is, how far should we chase it before we go, okay, I should stop in there.
Speaker 3 02:05:23
So... so i think pretty much at this point is where i should pretty much be asking yeah yeah i'd say.
Speaker 1 02:05:31
once you go so we call this yeah perimeter or the standard you go you know this rule applies to everything but if you go hey man i'm just taking it three more inches and i don't see.
Speaker 3 02:05:50
right then you know i imagine it's probably going to be the same thing that we have like at rocky point where a lot under a lot of the v bar is going to be like cavities because you know like the way they do the shotcrete um yeah so i mean so if that's the case so what we can do.
Speaker 1 02:06:18
here i would change it just a little bit more just underneath that'll be gifted, you know just gonna chase it a little bit more unless it's whatever's easiest right but i'd say it's just a little bit more two more inches and see where it goes yeah don't get sucked in.
Speaker 6 02:08:34
If the knee was up to here, it would have been really hard, that mother of a...
Speaker 2 02:08:48
Oh, well, how are you doing. 
Speaker 1 02:15:00
It would be weird, but we don't know if that ends right there, right? Why don't you open up an inch below it and see if we're sure that it stops there? Okay. Okay? You good with that?
Speaker 1 02:15:30
I didn't mean it like that. No, no.
Speaker 2 02:18:36
How are you. 
Speaker 1 02:18:43
Yeah, same. I'm okay. It's just warming up. So it's not...
Speaker 7 02:18:55
So I spoke to Chloe a bit at the beginning of this video. I know it's out there. What are they doing with it? Coping.
Speaker 1 02:19:05
The tile is tucked underneath the coping.
Speaker 7 02:19:10
So they're doing that part of it.
Speaker 1 02:19:14
so in advance of like the future install okay um yeah so if this is this is the bottom of the coping, yes that's tile right there yeah so they tucked it up okay so what they're doing is they're cutting behind it this is a little silicone joint so it's not actually connected to this stuff so we're just cutting behind it to catch the finery and then they're kind of like you know hand detailing that.
Speaker 7 02:19:50
out okay um yeah the owner i think like looking back i should have flagged that the coping wasn't in the price it would have probably been accepted if we had put it all in all at once the approach to all the coping too they were like no. There are extenuating circumstances where they're like, well, we have to stick with the budget that we have. So I'm kind of bummed out that it's staying, but it'll be okay.
Speaker 7 02:20:24
I get that. I'm learning things. I did notice there's some damage at one of the ones over there. So just, like, it's the top of the tile. It's got, like, a chunk missing from it.
Speaker 1 02:20:40
Do you want to go look at it. 
Speaker 7 02:20:42
Yeah. Is there anything we can do. 
Speaker 2 02:20:43
I don't know where.
Speaker 1 02:21:44
Not at all. It's a perfect photo. Okay. I'll have to worry about it.
Speaker 7 02:22:25
So we have that going for us.
Speaker 5 02:22:33
Pardon me, what's the stage. 
Speaker 7 02:22:36
Do some Kintsugi work.
Speaker 2 02:22:39
Well, I don't...
Speaker 7 02:23:08
Right, right, right. I don't know. I want to keep an eye on it. I will. Oh, is that another question is, I know you guys are closed, I think, let's say, on for next week. What, in terms of the work that's going on right now, what is the expectation?
Speaker 7 02:23:38
Like, how many days do you think you guys will. 
Speaker 1 02:23:42
Um.
Speaker 7 02:23:44
So I can, I have to get to the dumpster, so I'm going to probably wait until you guys are gone. Okay. Because I'm just being a little busy. And honestly, no one needs to be here for it. I can schedule it. And it's not urgent.
Speaker 1 02:23:56
Let me follow up with you on that one, too.
Speaker 7 02:23:58
The gardener took over it last week now.
Speaker 1 02:24:01
I know what's in my head, but I'm afraid to say it because we've had a couple, like, audibles called in the last couple days. And so.
Speaker 7 02:24:08
So I'll plan on scheduling it after.
Speaker 1 02:24:13
Just to get the dumpster pulled. 
Speaker 7 02:24:15
Yeah.
Speaker 1 02:24:15
Um, Debbie, we, yeah, we're definitely close between Christmas and Seattle. Yeah, and for us, if you said, hey, you know, there's no dumpster, and we're going to bag it anyway, is this a deal for us. 
Speaker 2 02:25:03
No.
Speaker 1 02:25:05
In a sense, I mean, it starts like, you know, it starts piling up, literally, right? But we wrap everything in a furrow. It's just easier to transport, you know, because it's kind of contained. But I guess what I'm saying is if you said, hey, Brandon, I'm going to bag it. 
Speaker 2 02:25:47
Yeah, we're done doing this.
Speaker 1 02:26:10
It's not, if you said, if I have an outlet, I'm okay, right? So I guess what I'm saying is, because on some level, we're going to do the floor lap, because that's why. So, you know, if I said, hey, guys, you know, make yourself a little, yeah, and that's fine.
Speaker 1 02:26:55
I do the opposite. Somebody asks me a question and I just stare at them. And they're like, what just happened? It's like, hold on. I'm so proud. I've got 30 more questions that I have to go through. Right. Exactly. I'm busting it. So, um, two questions. You carefully move the... Okay.
Speaker 2 02:27:39
You carefully move the...
Speaker 1 02:28:03
And then what I'd like to do is, I'm going to do it on yours, I have a, I guess there's one.
Speaker 2 02:28:35
Well, I mean, you know, all this, so, okay.
Speaker 1 02:29:01
Do you know that it has that gas fan, the red gas fan? I figure it's like anything else, right? You don't have to use it without turning this on.
Speaker 1 02:29:42
You know, when we get involved in so many things, like a busy job or anything like that, it's like, well, now we can do it as we're told. And some of us can. Let's put it this way, when your coach, who makes, like, they love and hate it, will go,
Speaker 1 02:30:15
it's crazy, and then you get the move, and then it's this, and never mind, I'm calling your boss, right? And it's like, why would you talk to my coach when you have to do this? I know, and so, but, and so, but, so, but...
Speaker 7 02:30:55
But yeah, go on.
Speaker 1 02:30:56
No, I'm not talking, I'm not, I'm saying in general. Oh, in general. Right? You guys are experiencing stuff.
Speaker 2 02:31:04
No, I was talking.
Speaker 1 02:31:15
There's a problem. I've always felt like I can walk in there.
Speaker 2 02:31:45
There's a lot of stuff in there.
Speaker 1 02:32:08
This is kind of our, kind of done our, what Tori brought me in with, literally, to get the.
Speaker 2 02:32:21
idea, you know, if you do it right.
Speaker 1 02:32:38
How long does something install last, what's the lifetime? That's 20 years, you know, some of these stuff could last forever, depending on what product you use, but the warranty's your buy, you know, so. I've gotten this on my sofa. Can I take the tape off? Is it going to, like, check the finish at all?
Speaker 1 02:33:10
Okay. We'll take it off. When they take it off, they'll clean it. Okay.
Speaker 7 02:33:22
Now, Leon, give me a shout if you need anything. Security team. There's a buzzer on the front door. You can buzz it. Oh, okay. Before we get my number. Yeah. It comes about.
Speaker 2 02:33:46
Thank you.
Speaker 1 02:34:23
Sure, that's actually perfect, I'll look at it up tomorrow morning, and I really want to go check it out myself, even before we talk.
Speaker 2 02:36:08
period. I appreciate it. You always offer me out water. I appreciate it.
Speaker 1 02:37:12
You know, my saying is that if I'm not messing with you, I don't like you. I had one guy that I was interviewing, and he, like, blew up on me. And I was like, you know, you know, you think you're so da-da. It wasn't for this company.
Speaker 1 02:37:44
You know, I don't bow to the man and da-da. And I'm like, what are you talking about? And I was like, what did I do to you? And he goes, when I walked in, you asked me if I knew what I was doing. And that was so offensive. And I'm like, bro. I asked everybody that oh and so he ended up I ended up hiring him because he calmed down.
Speaker 1 02:38:15
he calmed down we had a good conversation he was a good kid he just needed to learn a little bit so one day he comes at me again he gets mad I called him out on something and uh like you think that he goes off on me and he just had some insecurity issues it's not my he's not it's not really about me it's about him and uh and I was like uh they the other guys uh the demo guys broke there oh so these are all the pieces just in case we have to fix it so um.
Speaker 1 02:38:55
so anyway so he goes off on me and you know your problem is what get this chip. So every time I give you some advice, you turn around and throw it in my face.
Speaker 2 02:39:17
That's amazing.
Speaker 1 02:39:21
Something I'm saying could be beneficial to you. You can't hear it because you can't get that chip off your shoulder. So this is the last time you yell at me. You've got to figure that out. And figure out that I'm here trying to help you on the road. So maybe you're going to make it back. Hey, I'm getting pumped out now. Well, that's what I was like. I know you're really pissed off right now.
Speaker 1 02:39:53
I'm going to ask you to make that decision after you come back. I'd be pissed if somebody was telling me what's going on. He comes back at an hour late, he's like, he still works day to day. They loved him. I loved him.
Speaker 2 02:41:05
No, he's telling me to put the gun down.
Speaker 2 02:42:48
so let's stop here let's move on you guys have them all that i don't know what so maybe mark

[AI_SUMMARY]
On December 17, 2025, a coordination meeting was held to discuss a construction and renovation project, focusing on daily work plans, material applications, and logistical planning. Key topics included addressing water pooling, treating rusted rebar, ensuring correct waterproofing membrane thickness, and preparing cavities for repair. The team outlined immediate tasks, including pressure washing and cutting specific areas, while also addressing scheduling around holidays and equipment movement. Open issues included unclear material storage, broken pipes, and unresolved waterproofing specifications, with action items assigned to ensure progress.